• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

THE TM MWS thread

Well I have a nice project to work on!!

As per my post a while ago I bought the front end of the Angry Gun John Wick conversion set that @LVOA-D had bought to replace his upper that he broke. Well about a week ago, I received an email from him stating he was giving up Airsoft and did I want to buy the rest of the kit plus the donor MWS. Well I jumped at the chance. For the same price of a new MWS I got an unused MWS, the John Wick/Tarran Tactical kit, Prometheus Barrel, TM Tracer Unit plus extras such as SixG Nub, Modify Tan bucking, tools etc.

I am going to build it into a DMR. As can be seen it is essentially in kit form so I will be l learning a lot about the inner workings of the MWS in intimate detail!! At least I have my other MWS to use as a reference ?

View attachment 51549
Hi Rob, are you willing to sell the John wick 2 kit or are you still using it?

 
Hey Chai,

Unfortunately I am still using it or should I say will be using it. I have scavenged the Scope of it to put on the new PSG-1 GBB and plan on purchasing a Vortex Crossfire and 3x Magnifier so I can use it as a middle distance rifle. i.e. I have my MWS Block One for CQB and Skirmishes, my PSG-1 DMR for sneaky sniper stuff which leave a big hole in the middle which I hope will be filled by the TTR1. Soz.

Are Angry Gun still making them? I know they were extortionate when they came out. It does look pretty cool though! Excuse the Dogs paws in the photo, bugger get’s everywhere!

View attachment 97094

 
Last edited by a moderator:
Just drop down to duster gas, also bear in mind that being a GBB it will increase fps on heavier ammo as it ‘auto volumes’.

You shouldn’t need to de-tune an MWS, it’s made for Jap law, just change gas accordingly, you’ll want to use more and more powerful gas as the ambient temp drops.
Thanks for the suggestion. I have Nuprol 1.0  and more green gas coming tomorrow. I will test this weekend. 

 
Looking for a holographic sight for my TM M4 MWS that actually can be used as a sight and not just for looks?

Budget is around £200-300. Willing to push up to £400 or I would no more than that.

Looking to also combine it with a magnifier behind it. (Please list some options for this as well)
You should post a wanted add in the classifieds buddy!

I may just have some RS Eotechs going ;)

P.S Boys I'm back :D

 
Right then lads and lasses. Im about to fill an MWS shaped hole in my life and need to make sure I've got the basics covered. 

From reading through the thread the most common point of failure is the nozzle return spring and the Dynamic precision replacement is a good start. Would that be accurate? Same goes for feed lips & the creation replacements?

Is the Angrygun NPAS worth it?

Finally, externally - I'd like to go more classic than modern as all my kit is more period. Other than the Extortionately priced AG m733 & a2 receivers, are there any options for fixed carry handle uppers at all? Ive found the G&P Fixed stock and buffer tubes internationally, but are there any other options available that I'm missing?

Sorry that its a lot to ask all at once but I haven't been this excited about getting a new gun in about a decade.

Cheers in advance!

 
Right then lads and lasses. Im about to fill an MWS shaped hole in my life and need to make sure I've got the basics covered. 

From reading through the thread the most common point of failure is the nozzle return spring and the Dynamic precision replacement is a good start. Would that be accurate? Same goes for feed lips & the creation replacements?

Is the Angrygun NPAS worth it?

Finally, externally - I'd like to go more classic than modern as all my kit is more period. Other than the Extortionately priced AG m733 & a2 receivers, are there any options for fixed carry handle uppers at all? Ive found the G&P Fixed stock and buffer tubes internationally, but are there any other options available that I'm missing?

Sorry that its a lot to ask all at once but I haven't been this excited about getting a new gun in about a decade.

Cheers in advance!
I'm in the same boat... wanting a classic carry handle MWS for a long time. There is another option which is the Japanese NOVA. They have both an XM177E2 marking and an M16A1 marking. They are more expensive than Angry Gun but only because it is a kit that comes with XM177E2 complete front assembly. They also sell the M16A1 metal body stand alone and I think its just slightly cheaper than AG? I already ordered the NOVA and if all goes well, I can post the results soon.

 
Hey folks been a while since I needed a little technical help.

So about 10 months in with use around every 4 weeks and nearly 10k shots in, I have noticed something on my bolt whilst cleaning. There is a notch that has been made in the the bolt from it slamming into the roller in the trigger group.

View attachment 97872

It now has a very noticable indent when you rack the bolt resulting in the bolt 'sticking' about half way through its travel.

Has anyone else experienced this with a similar aged MWS? 

Would the thing to do be to just file it smooth like the red line here?...

View attachment 97873

 
Been doing some searching but can’t find an answer.

Does anybody know I’d the MWS is compatible with AEG body pins? 
 

Wanting to add a magic pin to reduce some receiver wobble, I know real ARs have the wobble but it’s becoming irritating now

 
Hey folks been a while since I needed a little technical help.

So about 10 months in with use around every 4 weeks and nearly 10k shots in, I have noticed something on my bolt whilst cleaning. There is a notch that has been made in the the bolt from it slamming into the roller in the trigger group.

View attachment 97872

It now has a very noticable indent when you rack the bolt resulting in the bolt 'sticking' about half way through its travel.

Has anyone else experienced this with a similar aged MWS? 

Would the thing to do be to just file it smooth like the red line here?...

View attachment 97873
This is normal. Every MWS does this. You can shave it down and smooth it off, but it will return. Its where the bolt hits the buffer stop

 
This is normal. Every MWS does this. You can shave it down and smooth it off, but it will return. Its where the bolt hits the buffer stop
Thanks. I assumed it was likely a common occurrence. I'll get at it with a file. Hopefully will sort out the issue.

 
Picked my first MWS up on Monday - managed to source the g&p full stock and front end from a lovely chap on here. Had an absolutely brilliant time rebuilding the front end & threw in a maple leaf 60d rubber & an omega nub for now. 
 

luckily for me I must have put everything back together okay as it still cycled, fed & shot a smidge over 1j on some freezing cold Ultrair with .28 devil blasters.

id like to get a fixed carry handle upper at some point and run an a1/2 hand guard but I’m more than happy with it for now.

View attachment 97921

 
Permission to come aboard folks?

After spending the last couple of weeks reading all 350 odd pages of this thread, yes 350 odd, my browser crashed somewhere around the mid 100’s. So I thought well it won’t do any harm to read everything from the start again so I don’t miss anything ?

I managed to pick up my MWS from @GothicGhost on here on the 10th August, along with a few other bits he had as well. You can probably excommunicate him from this thread now ?

This is a pic of it as he had put it back to stock and in the advert:

View attachment 78696

I have since upgraded it and added @davegolf’s awesome SixG Super nub (https://sixgunsmithing.com/2018/03/11/sixg-super-nub-for-marui-gbbr/) and have his HSB (https://sixgunsmithing.com/2019/07/07/sixg-hsb-high-speed-buffer/) on order as well.

I also swapped to the Modify Tan bucking and the inner barrel to the G&P Marui MWS V 330mm one that I picked up with it.

With a few other external mods and another 3 mags, it now looks like this and I love it

View attachment 78698

Thank you for everyone that has contributed to this amazing thread so far!


Reading through the thread again as I am getting  another MWS to go with my MTW DMR  lol I miss the recoil :P

Also when it comes to PDW stock is 5KU and DYTAC anygood  or should ty and find a  G&P ones only?

Thank you.

 
Last edited by a moderator:
Had to replace my TM nozzle the other week, as the front gas port plastic bit was bending back. 

This is the Dynamic Precision nozzle after approx 30 rounds yesterday, mid-game

View attachment 98659

I'm not impressed.

Got a Guns Modify one to try. What are peoples recommendations at the moment, as TM ones seem non-existent?

 
Had to replace my TM nozzle the other week, as the front gas port plastic bit was bending back. 

This is the Dynamic Precision nozzle after approx 30 rounds yesterday, mid-game

View attachment 98659

I'm not impressed.

Got a Guns Modify one to try. What are peoples recommendations at the moment, as TM ones seem non-existent?
TM or GM nozzles all the way. DP ones are brittle and shatter. Some have had good luck with the v2 Angry Gun ones.

 
Hi everyone, is there an updated spreadsheet with the parts that actually work well?

 
Are Angry Gun still making them? I know they were extortionate when they came out. It does look pretty cool though! Excuse the Dogs paws in the photo, bugger get’s everywhere!
I saw on Instagram that EMG are testing out a TTI kit for the MWS. Not sure who the OEM is.

Also whilst poking around instead of working, I saw the Noveske is up for pre-order as a complete rifle. The body kit is more expensive, but the whole rifle is Cyma based and MWS compatible.

https://www.evike.com/products/102356/

Additionally, it is different to the Double Eagle system

https://www.evike.com/products/103135/

The wording is slightly different as well. The Cyma is MWS compatible, whilst the DE says its the MWS system.

 
Last edited by a moderator:
Back
Top