• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

THE TM MWS thread

Has anyone got opinions on the guns modify pmag? I bought 6 brand new recently and so far I’ve had to replace the bottom gasket with a juicier oring on 2 of them. 
also I swear there are two different fps versions? Half seem around 270 and half seems around 305 on .25g bbs. 

 
Has anyone got opinions on the guns modify pmag? I bought 6 brand new recently and so far I’ve had to replace the bottom gasket with a juicier oring on 2 of them. 
also I swear there are two different fps versions? Half seem around 270 and half seems around 305 on .25g bbs. 




 
Last edited by a moderator:
1 hour ago, C-Diddy said:



Yeah seen. And this was an opinion on one magazine. I have six and was hoping people on here would share their experiences?

but thanks anyway. 

 
Yeah seen. And this was an opinion on one magazine. I have six and was hoping people on here would share their experiences?

but thanks anyway. 
Be interested hearing the responses as I'm contemplating a few myself. 

 
Last edited by a moderator:
I bought six. One leaked from new out of the box, and another leaked after being used once. It appears they have both leaked from the fill valve. They seem to produce a bit more power than standard mags, but it is a small increase. Luckily I still have six standard mags. At some point I will get them sorted.

 
I have 5 and 2 developed leaks from the base. Opened them up and tried some PTFE, did the trick for a wee while. Don’t suppose anyone knows the right size or slightly larger o-ring to replace the original or if it a case of going the way of MP7 mags and using instant gasket? 

 
I have 5 and 2 developed leaks from the base. Opened them up and tried some PTFE, did the trick for a wee while. Don’t suppose anyone knows the right size or slightly larger o-ring to replace the original or if it a case of going the way of MP7 mags and using instant gasket? 
I have replaced two gaskets from the base with orings. They work a treat. The size is 24ODx2mm thick, maybe slightly thinner but as close to 2mm as a tape measure will allow. 
 

They were tough to get in but persevere bro. 

 
I have replaced two gaskets from the base with orings. They work a treat. The size is 24ODx2mm thick, maybe slightly thinner but as close to 2mm as a tape measure will allow. 
 

They were tough to get in but persevere bro. 
Which retailer did you get yours from, if you don't mind me asking?

 
Appreciate that @SBoardley Still very tempted. I was looking at the European retailers, as the mags are quite a bit cheaper, but the postage charges are nuts. 

 
Last edited by a moderator:
I think I paid 65 each so yeah quite expensive but I needed the modem look for my a2. I like how you have a couple different options for loading, and they are definitely well designed though obviously have a couple of issues with seals. But once this has been overcome I feel they are worth it.
Just wish I could get an Emag version tbh. Rs ones fit my WE and ngrs! Maybe someone knows someone who could print some gm spec shells? Dunno. 

 
I can't understand why TM haven't dropped their MWS mags into a P-Mag or E-Mag shell. Maybe one day. 

Think I'll pick up some of the GM ones and grab myself some addition o-rings!

 
I can't understand why TM haven't dropped their MWS mags into a P-Mag or E-Mag shell. Maybe one day. 

Think I'll pick up some of the GM ones and grab myself some addition o-rings!
Licensing issues I expect. 

 
Hello lads 

I'm thinking on picking up a mws as a project/light skirmish gun 

And would like to ask a few questions 

1: how durable is the receiver is it made from a quality material that won't crack.

2:How reliable are these and how long do they last before an issue appears 

3:will the ratech magic reciver pins work In this

4: After extended use on green gass what parts will break I know about the nozzle return spring but what else shurley it being run at a higher pressure will damage something 

 
Last edited:
gm p mags…
@Salamanca just letting you know bud, I had a leak from the output valve on one magazine today. Not sure so I took all the orings off and soaked them in silicone oil, but it did feel slightly loose in its thread, so when I put it back in I made sure i cranked it nice and firm. 
Incidentally, the valve knocker is held in by a pin which has serrations on one end to hold the pin in place. I found out which end the hard way. The serrated side is on the side of the stick on thermometer thingy so you need to hit the pin  from the side. Hope this helps peoples. 

 
Great, thanks for the update. I will give my output valves a service, based on this. 

 
slight adjustments: install NPAS

More FPS: tighter or longer barrel

less FPS. less powerful gas, shorter barrel

 
Back
Top