• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

Gun picture thread

Davegolf said:
@SeniorSpaz87 most of us are not lucky enough to own RS, please enlighten us/me ?
Click to expand...


.40 S&W was made after a requirement for the FBI was posted due to the Platt and Matix case back in 86. One of the two was shot through the heart in the opening seconds of the gun battle, yet he went on to kill some 5 agents before finally bleeding out. The FBI was adamant it was the small caliber of their 38 Special revolvers that was the issue, not a lack of training. S&W received the contract to create a new bullet and gun that could use it. (This is where my information starts to get a bit hazy - been a few years since I heard the "behind the scenes" story. Ill update this should I find my info is slightly wrong. The premise still stands) This lead to the creation of the .40S&W. The FBI, however, wanted to use a round that was near-identical to the .40 - the 10mm. The 10mm and .40S&W work in the same guns, are the same sized bullet, similar enough casings, etc - similar to how .357 Magnum and 38 Special can be interchanged as long as your gun is rated to the higher pressures of the .357. However, the 10mm was such a "hot" round (industry term - meaning fast, powerful, lots of kick, etc) that many agents couldn't handle it. It also had issues in the upsized S&W 9mm guns S&W made for it. The FBI was unhappy and got into a massive legal battle with S&W over it. Long story short S&W won the case as the guns were built to the FBI's original specifications, and not the specifications of the 10mm. This lead to both calibers being available. In the end a .40S&W has very similar ballistic properties to a 9mm, but it kicks harder and puts far more stress on a gun than a 9mm. A "Race" style pistol like that would have issues with a .40S&W. A 10mm would be even worse. I know all this as my grandfather was actually a key witness for the case. He was with the FBI but left a bit before on an indefinite leave of absence to pursue his holster making business idea (what eventually became Rogers Holster Company, then HolsterOps and then a major part of Safariland). He also had his range and training that was being utilized by the US Gov for military training. As a part of the trial the judge ordered both groups to agree on an independent contractor to test the guns and ammo, and both parties were happy to use Rogers. It was something crazy that he and his team had to do - something like take 200 guns and test 500 rounds through each gun. He said they ended up wearing welding gloves and taping their wrists up with duct tape to get through it all. His findings were in line with S&W's argument, so the FBI actually lost that trial. The interesting thing about it all was - it wasnt the bullet that was the issue. Matix was a dead man regardless - no surgeon in the world could save him. But the shot could have been fired by any handgun up to and including a .44 Magnum or .50 AE, and the result would have been similar. The FBI training at the time was to fire a single shot into the torso within 1.5 seconds. If the officer had put all 5 rounds from his revolver into the chest, or even better tried for a headshot (the two were less than two feet apart. It would not have been a difficult shot...) things might have turned out different. There were a lot of other issues in that case that changed Bereau policies, but Im not going to get into them all here. 

 
Alimcd said:
Advanced frame arrived yesterday for this beastie. I think she’s a looker, but I’m a sucker for cats

View attachment 71374
Click to expand...
I’m not a great lover of pistols but I do like that , except for the grips , they look to me like you bought them from your local bakery , they look like a black Yule log stood on its end ! ?

BUT As long as your happy , then who cares ? ?

 
Druid799 said:
I’m not a great lover of pistols but I do like that , except for the grips , they look to me like you bought them from your local bakery , they look like a black Yule log stood on its end ! ?

BUT As long as your happy , then who cares ? ?
Click to expand...
I’m never going to be able to unsee the Yule log chocolate icing effect now! 

 
Last update of the abomination , wasn’t happy with a ‘naked’ dust cover so sorted that and then decided it needed a tactigay sling , so made one of those as well , also decided to give the PBS a bit of character as well ! Can’t wait for its first kill(the souls that die of those who gaze upon it don’t count !?) ?

View attachment 71405

View attachment 71406

 
That is going to destroy people mentally, it’s a bad enough shun getting knife killed let alone by that bile!

They maybe a lot of people with mental breakdowns or a strange type of PTSD.

PS I think you should have a red/pink tracer set up.

 
is it bad that i'm starting to think you might as well spray the remaining black parts a slightly darker shade of pink for the 2-tones effect.

please, someone, snap me out of this.....

 
Adolf Hamster said:
is it bad that i'm starting to think you might as well spray the remaining black parts a slightly darker shade of pink for the 2-tones effect.

please, someone, snap me out of this.....
Click to expand...
Maybe green, for that watermelon look :D

 
2nd hand Cyma CM041 highspeed stripped of the dark green / black camo paint. Re-shimmed gears, already short stroked 4 teeth on the sector gear so took 4 off the rack to prevent PEM. Wired in a Gate MERF mosfet to the rear (loads of room in the stock) new air nozzle (worst part of any Cyma!) and threw in a Maple Leaf hop rubber and nub. G&P front end with LED torch, I have some 2mm lexan coming to make a lens protector for the inevitable CQB shoot out ?

Shooting 340fps (+/- 2fps) on 0.20g and 19rps on a 7.4v I could run an 11.1v but I don't need 27rps!

View attachment 71716

 
Druid799 said:
Last update of the abomination , wasn’t happy with a ‘naked’ dust cover so sorted that and then decided it needed a tactigay sling , so made one of those as well , also decided to give the PBS a bit of character as well ! Can’t wait for its first kill(the souls that die of those who gaze upon it don’t count !?) ?

View attachment 71405

View attachment 71406
Click to expand...
Such a gun deserves a proper essential campo loadout. Details are important, right?

Behold..... taaaa daaaa

View attachment 71760

 
You must log in or register to reply here.

Similar threads

andersson
G&G L85a2 upper receiver jumps out of alignment
Replies
1
Views
233
ButcherBill
ButcherBill
S
VFC BCM MCMR GBBR and VFC PRO FORCE Sig MCX
Replies
0
Views
489
StayOnTarget
S
Zarrin
Asian retailer Checkout w/ over 50% of RIF externals
Replies
5
Views
1K
Bnjemann
Bnjemann
Dogsbody100
Upgrading a Well MB 01
Replies
3
Views
642
Rogerborg
Rogerborg
sam_91
Hey All , new to this forums but not new to Airsoft
Replies
1
Views
924
ButcherBill
ButcherBill
Back
Top