Gun picture thread

[Harrison448]

Cyma CM048M start to finish

View attachment 72353

 

[Pydracor]

Something I've been hunting for quite a while now:

Hudson IMI Jericho 941 GBB, silver version

Very rare gun from the early 2000's, uses the Maruzen GBB system from their P99. One of only 3 airsoftguns Hudson has ever built and the only GBB of this pistol.

Had to install wood grips on this (they're almost drop in, just have to remove a little from the heightened wood part on the inside, so that it fits the pocket of the frame), back then I only found ones with the newer "IWI" name. Recently found ones with "IMI", they're on their way now

Surprisingly tight measurements for an old japanese plastic GBB

 

[Druid799]

Foundry Airsoft HALO magnum kit , it’s actually intended for the Glock 17/18/19 but with a ‘wee’ bit of dremeling it fits nicely on an 18c .

View attachment 72469

View attachment 72471

 

[GothicGhost]

Finally got the black sling mount and it's finished.

Nice compact for traveling

View attachment 72487

View attachment 72488

View attachment 72489

 

[Hellfish]

Specna Arms Rock River Arms SA-C06 CORE all dressed up with no where to go.

Changed the flash hider for an Epsilon 556 VG6, the plastic stock tube for a metal one added a different stock and slapped a short Bipod, short Dot Scope and angled iron sights on for a DMR set up.

Not sure about the irons .... maybe angled ris mount and back up RDS would look better instead?

View attachment 72525

 

[Impulse]

Rifle wrap arrived. I love it! Sprinter Custom Ghillie are ace! Does need a long rifle though, as that's a VSR-10 Pro with a suppressor (175mm) on the end, and the rifle wrap covers all the way up to the rail where the scope is mounted and I still have full access to the underside of the rifle so I can reload with no issues. Scope cover is a separate item that goes around the scope itself, but droops down low enough to also cover the rifle without interfering with the bolt pull. It's honestly perfect, one of the best £65 I've spent in airsoft.

When I can afford it, I'll probably end up buying one of their ghillies too, if this is anything to go by.

View attachment 72532

 

[heroshark]

View attachment 72541

View attachment 72542

 

[PopRocket123]

At this point it's basically finished, minus going back through and making sure all the parts will fit and have the right spacing. 

View attachment 72586

View attachment 72587

View attachment 72588

 

[Hellfish]

Up Close and Personal vs Long Distance Relationship.

Which do you prefer? ??

View attachment 72648

 

[Tackle]

View attachment 72541

View attachment 72542

View attachment 72657

 

[Harvem]

Specna Arms Rock River Arms SA-C06 CORE all dressed up with no where to go.

Changed the flash hider for an Epsilon 556 VG6, the plastic stock tube for a metal one added a different stock and slapped a short Bipod, short Dot Scope and angled iron sights on for a DMR set up.

Not sure about the irons .... maybe angled ris mount and back up RDS would look better instead?

View attachment 72525

I'm thinking about picking the SA-C06 core as my first rif, but I was wondering about the rail. It looks weird, how easy or difficult would it be to attach stuff like a flashlight to it? I guess you'd need to attach a picatinny rail first, right?

 

[Lozart]

I'm thinking about picking the SA-C06 core as my first rif, but I was wondering about the rail. It looks weird, how easy or difficult would it be to attach stuff like a flashlight to it? I guess you'd need to attach a picatinny rail first, right?

A rail mount torch will fit on the rail sections at the front end of the handguard, if that places it too far forward to reach the controls then a remote tape switch could be fitted to the top rail or (less ideal) you could fit and offset mount to let you attach the torch further back but still place it to the side.

 

[Hellfish]

I'm thinking about picking the SA-C06 core as my first rif, but I was wondering about the rail. It looks weird, how easy or difficult would it be to attach stuff like a flashlight to it? I guess you'd need to attach a picatinny rail first, right?

Good rifle. Nice weight to it, even with the Polymer Receiver.

You can get RIS Add-on panels for the handguard, but I've had real issues finding any in stock in the UK.

Resorted to buying a set from an unknown supplier in Asia ... worth a punt for £13 I suppose.

 

[Helyk]

Airsoft Artisan rail and suppressor finally arrived and fitted on the MCX?

View attachment 72698

 

[mightyjebus]

ASG CZ Bren 805 A2 - Leopold copy, Battle Axe battery powered Hi-cap, Gemtech suppressor and some random vertical grip

View attachment 72705

 

[Davegolf]

@Helyk can you get more vertical pistol grips for the MCX? Ive always been suprised SiG put such an angled grip on what is a close quarters gun.

Got my P90 together and im back in love, shouldnt have sold my old one years back, running sweet at 22RPS / 325 FPS with perfect timing / no overrun fully mechanical on the original TM wiring!

Just waiting on the Shadow Regime M-Trigger to land and i can hook it up with the WarFet

I know Asomodai will respect the bullpup ?

View attachment 72728

View attachment 72729

View attachment 72730

View attachment 72731

 

[GeorgePlaysAirsoft]

G&P Stoner 63 with chopped barrel and stock, rails and vfg bolted on

acetech predator tracer

perst 4 laser

vortex crossfire 2

UT style high mount

View attachment 72736

 

[SeniorSpaz87]

G&P Stoner 63 with chopped barrel and stock, rails and vfg bolted on

acetech predator tracer

perst 4 laser

vortex crossfire 2

UT style high mount

Now THATS a riser haha

 

[heroshark]

View attachment 72781

View attachment 72782

 

[cropzy]

View attachment 72781

View attachment 72782

Nice!

Where did you buy this from?