LazzurusMan

Got one sorted by taking the valves out and cleaning them withnsilicone oil. One is still leaking though, and the orings looked fine.

Got a leak coming through the top of my asg hi capa co2 mags. I can hear it coming through the router, what would be the best way to fix or attempt to fix this? I've searched online but everything is about the inlet valve and baseplate leaking.

Managed to get it to fit. It was a nineball wide airflow (whatever that is) I've not had a chance to test mine properly. Love the autobot in my pistol, so hoping it'll work well in my noveske.

Me again. Trying to fit a nineball bucking to my friends mws, and the hop chamber won't sit together properly, and won't let the barrel and hop enter the outter barrel. Is it a bucking issue? Am I putting it on wrong? It doesn't seem to fit as well as the autobot bucking he wants to replace (why I don't know, these autobot bucking seem to be amazing to me).

I'm not sure. My friend has my rifle atm as he was setting them up as I pick my daughter up. It has happened before, and from what I remember the bolt goes forwards but the bb doesn't enter the chamber properly and the entire magazine of gas gets vented. And it's happened with both de mags, and tm type 89 mags.

Need some help from experienced mws users! Friend is currently getting his mws and my noveske set up for next weekend at tuddenham, and my noveske has jammed 4 times, and now when he tries to fill the magazine he was using it immediately vents out the top, as iff the vaalve on the magazine is stuck. Any ideas what this could be, and how to fix it??

I apologise for the terrible photo but anything I took with the rear camera was too big a file to upload. Considering I didn't use an undercoat (the grey just peeled straight off) and it was cheap matt black wheel paint from poundland, this hasn't turned out too badly.

Gbb. I've sprayed up the pistol grip, didn't use primer as it just peeled off, the black went on lovely, just waiting for the matt coat to dry then I'll be slapping it back on the noveske. It's only to make it look how I want for a game this Sunday.

I know it will chip, this is just a stop gap until the moe k2+ comes back in stock in black where I can get it without paying international shipping and tax.

I've got some grey plastic primer from halfords, worked fine on motorcycle fairings and has never let me down on models either. Also got white, so plenty of options. Is it worth apply a matt coat afterwards to try and preserve the paint job?

So, I'll start this by saying I'm no newcomer to spraying and airbrushing (airsoft isn't my only expensive hobby), but I do just want to pick a few brains for some quick advice before I break out the rattle can. I want to spray up my pistol grip cause the magpul moe k2 is out of stock in black almost everywhere and my rifle would look so much better with a black pistol grip. I won't be sanding it as it has a nice texture to it that I don't want to ruin, so the paint might not adhere great. Is it worth giving it a matt coat, or will it still wear off regardless? Same with undercoating it first, is it really worth it if the paint won't last long regardless?

Ended up getting an angrygun bolt with mpa for now. Seems pretty consistent so far, and it's way lighter than the stock bolt. Just LOTS of tiny adjustments to get to 1.13j on .32 with red gas.

Me again, with yet another stupid question for you gbbr veterans. When putting a bucking on a gbbr barrel, do I need to use the little metal ring that came with the bucking? Put a maple leaf autobot 60, laylax hop arm and laylax barrel into a friend's tm mws and he's getting about 20 meters with full hop, and the bbs almost fall out of the barrel with no hop applied. That metal ring that comes with the bucking is the only thing I can think of that might be causing issues, and I don't have a long enough garden to change it and test it myself.

Cheers guys. I'll pick some up next time I'm b&q direction.

Ok, cheers everyone. Ive got some silicone oil that I use on my pistol, ill probably go with that for now. By 3 in 1, do you mean like wd40 type stuff? Ive got my daughter this weekend so my brain is currently fried from being repeatedly asked "why" and "whats that".