navyvet86

Vfc sig m17
*Only used a hard full of times 
*2 gg mags
*1 c02 mag
*sig air rmr with cover
*kydex holster in coyote 
 
Perfer collection in person and would meet up

SOLD
please do not contact about this item

I offer RFID DOMINATOR version 2.0 built by me, which has implemented firmware for 2 teams - red and blue. The stopwatch allows you to measure the total time of occupying a point during the duration of the Capture the Hill / Domination game mode in the Airsoft / Paintball game. It works like a chess clock, when only one team can be active on a point at a given time, the team that has more time to hold the point at the end of the day / game mode wins.

The hardware prototype has 2 LEDs in the colors of the given teams to indicate the current team holding the point. The player takes the team by attaching the RFID wristband to the reader. The wristbands are also in the colors of the teams, making it easier to distribute them to the players. The bracelets are maintenance-free.

In total, there are 10x red wristband, 10x blue wristband, 3x black wristband (referee that can stop time), 2x black wristband with eraser marking, which can stop time and reset it for a new game.

Power supply via mini USB cable (not supplied). All components are mounted on a PCB board, the main components such as Arduino, RFID reader and display are in pin strips. In the event of a malfunction, just pull out the given module and replace it with a new one. I also provide the .hex machine code to the prototype for the possibility of cloning the firmware to multiple devices, or to program the microcontroller in case of replacement, compatible for ATmega328P with 16 MHz oscillator (AVR Arduino Nano).

The PCB is double-sided (double-layer) with overcoats.
I am sending by post second class in my own hands, +3.9€ to the price. I send within 24 hours after payment, i.e. the following day in the afternoon. Before shipping, the hardware is tested and a functionality test video is created.
Possible to expand to 4 teams in the future, increase the number of wristbands or RFID cards to the current number (individual agreement).

It can also be powered via a 9V battery, it is necessary to solder the connection to Vin.

The PCB is equipped with:
Arduino Nano V3.0 RFID RC522 (13.56 MHz) LCD 2004A with I2C converter Active buzzer, circuit set to 2.3 kHz 2x LED 5mm 2x resistors
PCB dimensions: 104x103 mm x 45 mm (including components), contrast can be adjusted in the rear part
The inner diameter of the bracelets is approx. 55 mm. Price including post fees

Glock 17 EU - Gas blowback
 
Selling due to not being used, used for 1 game day..
Everything works as it should
 
Will even throw in the green gas bottle.
 
Open to sensible offers

Rwa exa 
1 co2 mags, all gas tight, slide has a small piece broken off which doesn't effect use, cleaned and lubed properly after each game
£95
Can add a gas mag for an extra £10

Selling my Tokyo Marui Resident Evil Samurai Edge. This is the hi-grade version with fully adjustable hop unit. It comes with a Maple Leaf Autobot green 50 installed. 

Included are 5 gas tight magazines. Base seals have been replaced on 2 magazines with LPE O-rings as M9 mags love to leak. ALso comes with a Kydex M92 holster with a QLS mount on the back. 
 
Comes with original box, manuals etc. 
 
This package new is about £350. Pistol £185.99, extended mags £31.99 each, standard mag £24.99, kydex holster £50. Price includes postage with Royal Mail Next Day delivery.

If you have any questions, would like other images or a video just let me know. 
 
 

Hey all 
 
I looking to sell my VFC glock 17 gen.5 gbb pistol , it’s in great condition , just a few marks on the top of the outer barrel due to gun cycle 
 
works brilliant I didn’t like it so looking to sell to buy something else 
 
gun comes in original box with 1x mag 
 
looking for £125 posted to your door 

As the title, in new condition. Only been fired once or twice in the garden to test whether it's working correctly (which it is). Comes with the original box (also in pristine condition) and everything it has in the box from new. I'm asking for £120 delivered which is a £65 saving over it's new price

Selling my very lightly used m18 as I recently purchased an m17 which I prefer more 
 
comes in original packaging 
 
includes:
- hop up adjust key 
- mag 
- VFC M18
 
has been shot a few times in the garden (never skirmished) 
 
(orange tip removed, ex two tone) 
 
shipping +£5 (PayPal fees included) 

I offer firmware for RFID Domination Timer project that is based on AVR ATmega328P chip (Arduino) architecture. In price is included machine code .hex for that architecture for your RFID cards that you have provided via Google Spreadsheet teamplate. Also there is included .lppz archive for PCB manufacturing with drilling, layers inforamtions etc. I don't offer source code in .ino format or hardware with PCB.

Project description:
Domination timer (DOMINATOR) is a stopwatch device designed for 2 teams (scalable up to 4 teams) that play against each other and try to occupy the point and keep it for as long as possible. The stopwatch is suitable for Airsoft / Paintball game mode DOMINATION, resp. Capture Hill. They consist of an ATmega328P microcontroller (AVR), which can be part of the Arduino development kit (Uno / Nano / Pro Mini). An LCD character display (size 16x2 or 20x4) is used to visualize the times. The times are listed in two lines below each other and are dynamically updated if there is an active team at the point (a point occupied by a team). The stopwatch is equipped with indicator LEDs in team colors, which signal the active team at the point and a detector (piezo transducer), which announces the change at the point after attaching the RFID card.

Teams are implemented in the game - RED team and GRE team who play against each other and try to occupy the point and then keep it for as long as possible. At the beginning of the game, the display shows the times 00 hours, 00 minutes, 00 seconds for RED team , GRE team . Each team member is equipped with an RFID chip that is integrated into the bracelet (or card / keychain). The RFID chip transmits its unique identifier - UID (unique ID), which is read by an RFID reader and verified in the logic of the system to which the entity (team) belongs. Individual bracelets can be color-coded (red, green by team and entity function), which allows them to be distributed more quickly to players, but also archived and stored by color. The RED team will occupy the point when the RED team member attaches his card to the RFID reader. This action triggers a buzzer that announces the change of point with a short beep. Subsequently, the LED of the RED team at this station will light up and the display will start adding the time for this team until the member's team card is inserted, Referee , or Eraser.
 
 
If the point is occupied by a GRE player and the card is attached to an RFID reader, the buzzer will announce this change with a short beep, the GRE LED will light up (RED LED turns off), RED's current time stops , and GRE's time is scored. If the Referee attaches his RFID card, the running time will stop at the current value. The point becomes neutral, the active team's LED goes out. The stoppage lasts until a member of the RED team or the GRE team presents their card. This type of card is thus suitable for temporarily stopping an ongoing game, controlling a player's intervention, or injuries. At the same time, the card can be used at the end of a round of the game, to evaluate the round, respawn teams before continuing. If Eraser attaches the card, both times will stop and reset to the initial value of 00 hours, 00 minutes, 00 seconds, which will be displayed. The Eraser card is used to restart the game, to initialize a new game without the need for a power-on cycle. The RFID reader responds to the insertion of an RFID card immediately, including the entire logic of the Dominator project. The project is suitable for Airsoft events, sports facilities, or Airsoft teams, which can build a Dominator device with their own hardware.

Firmware is universal for Arduino Nano / Uno or standalone ATmega328P chip, it is also possible to use the available PCB design for the production of printed circuit boards (PCB using Arduino Nano only!). The advantage of the RFID Domination timer project is that the usage license authorizes the user to clone and create X points with the same configuration via machine code. Machine code (.hex) is a compiled firmware format for the RFID Dominator project for supplied UID RFID cards that are embedded in the code before compilation. It is thus possible to place any number of independently operating RFID Domination timer points in the game, which respond to identical RFID cards according to a uniform configuration. The RFID Dominator system is programmed well, it exist from 2018 year, it can be put into the game immediately. Firmware uploads within 10 seconds via XLoader (recommended software).

 
 
How RFID Domination Timer works (hardware side):
NXP RC522 RFID reader communicates with the microcontroller (Arduino / stand-alone chip ATmega328P) via the SPI bus with a clock signal (SCLK) of 4 MHz. The RC522 reader responds to the RFID chip at a distance of approximately 3 cm from the antenna, while having a configurable antenna gain in the range of 18 to 48 dB (48 dB is used in the final application for DOMINATOR). Reads the UID (identifier) of RFID chips in range, forwards this identifier to Arduino. Arduino compares the read address of the card in a multi-condition, triggers a buzzer beep, applies digital states to the LEDs, runs a universal counter controlled by the internal function millis(), which is responsible for counting both times.

Based on the fulfilled condition, the counter starts to be applied to the given team to which the UID belongs and the time counter is running. The time is plotted on a 16x2 or 20x4 LCD character display. The time data is sent via the I2C bus with a clock signal (SCL) of 100 kHz (Standard Speed). To restore the display as quickly as possible, only the number at the given position (given character) is overwritten. Hours and minutes and seconds are overwritten only when changing and always only for a given team. In case of serious interest, it is possible to create firmware in machine code for Domination Timer to 3 or 4 teams, also possible to use Fast Speed I2C up to 400 kHz (based on deal).

Actual version of RFID Domination Timer project supports these types of firmware RFID readers NXP RC522:
Firmware version: 0x12 = counterfeit chip - (non - original NXP chip, replacement) Firmware version: 0x91 = Version 1.0 - (original NXP chip) Firmware version: 0x92 = Version 2.0 - (original NXP chip)  
Where RFID Domination Timer should be used:
RFID Domination Timer project is, in terms of its versatility, suitable for implementation in Airsoft actions, and with the possibility of cloning the firmware, it is possible to place X Domination Timer points in the game field with identical firmware, which players can play with the same RFID cards. Domination Timer is also suitable for teams, sports grounds and playgrounds, which can use this device to expand the services and game modes offered for different numbers of players. If RFID cards, bracelets or key fobs are color-coded, it is very easy and universally distributed to players based on their team. Their archiving is also simple. Using cards, bracelets or key rings is easy and can handle all ages in Airsoft games. RFID chip itself is protected in a plastic case, it does not mind mud, dirt, water, frost, it is fully maintenance-free. It has no battery, the chip activates the RFID reader, which charges it with the transmitted electromagnetic field and allows it to send a UID - identifier if it is within range of the RFID reader. Domination Timer is suitable for game modes with the same number of players in both teams, e.g. DOMINATION, Capture Point (Points for multiple cloned Domination Timer points).

Project hardware - RFID Domination Timer:
Arduino UNO / Nano / standalone chip ATmega328P LCD 20x4 or 16x2 (20x4 layout is used in PCB design) I2C module for LCD display RFID reader RC522 (13.56MHz) ISO / IEC 14443-A standard keychains / cards / bracelets Passive buzzer (optional) 2x LEDs, 2x resistor (1x 220 ohm for GREEN LED, and 1x 1 kohm for RED LED) 2x resistor 10K I2C pullup (optional, useable for larger distance between display and Arduino)  

Software is delivered in machine code (.hex) at your mail for the ATmega328P architecture. The price is for 10x RFID UID for each team and 2x for the Referee and Eraser, total of 24x UID. If you want to increase the number, it is possible for 5 GBP / another 5 UID. The machine code cannot be modified and is tailor-made for the authorized operator based on the UID, which it delivers in .xls format (the template is available on the project page with an extended project description). It is possible to try for free one UID for each entity in project (ping me at mail for that).
 
More about project you can read at: https://martinius96.github.io/Airsoft-DOMINATOR-RFID/en/index.html
Template (.xls) document where RFID UIDs can be written for each entities from test sketch available on website: 
https://docs.google.com/spreadsheets/d/1EHpdJi8v84eJ-6ExEPT6JuPkxI9Tfbm8v85zGRFvJ1Q/edit?usp=sharing

Shareware version of project
Project can be tested for free with your hardware before buy or payment in shareware version. There is available firmware on project's website. Firmware let you to use any 4 RFID cards (each for one entity). So you will have chance to test whole compatibility of project with your hardware. You can measure time up to 15 seconds for each team (then time will be automatically stopped). Then you can reset time using Eraser card and you can measure again 15 seconds for each team. Full version of project is without time limitation and with max 24 UIDs that are written directly to PROGMEM of microcontroller.

Firmware (.hex file) can be uploaded to microcontroller via Xloader: https://www.hobbytronics.co.uk/arduino-xloader
Or more experienced users can use AVRDUDE via console. For Arduino boards use 115200 baud/s upload speed. For Arduino Nano V3.0 clone use 57600 baud/s (Old Bootloader), otherwise firmware will be not uploaded.

Shareware firmware for direct download:
Shareware_RFID_DOMINATOR.hex - compatible for standalone ATmega328P chip with 16 MHz oscillator, Arduino Uno / Arduino Nano / Arduino Pro Mini  

Good condition stock as per the pictures
£30 p&p

Here we have a custom Tokyo Marui Glock 17 Gen III. Built from some of the highest quality materials. The intention was to skirmish it. It’s now looking for a new home.

Everything in the photo has been installed. Known as a 'sleeper', it appears predominantly stock/standard with a large number of internal upgrades.

The upgrades improve accuracy, range, reduce gas consumption, strengthen the robustness of the pistols function, improve each firing action of the slide, improve trigger feel and response, improve cycle rate and firing feel, improve sighting. On top of that the trigger, front sight and steel body pins add to the look of the pistol.

All components are new apart from the extra mag, which has been used indoors to test the pistol during fitment. It has NOT been skermished.

Components:
-Brand New Tokyo Marui Glock 17 Gen III £140
-Test Fired Extra Marui Mag £26
-X2 Madbull Routers £13
-Fiber Sight £18
-Trigger With x3 Inner-Triggers To Choose From £28
-Steel Guide Rod & Spring Set £18
-Enhanced Piston Head £5.60
-Precision CNC Inner Frame £40
-Steel Hammer & Spring Set £42.50
-Steel Body Pin Set £11
-Hop and 6.02mm Barrel & Hop-Rubber Set £28
-Precision CNC Blowback Unit £48
-Steel Trigger Lever £33
-Custom ACP Pistol Stand £15
-Gas inlet Valve O-Rings (no-leak when filling) £free
-Build Cost: £64

TOTAL: 530.00

It’s all been painstakingly filed, fitted and tuned and has had about 400 bb’s through it to test it during fitment.
I’ve designed it to be functional on standard propane gas (328fps) as well as tolerate High-Pressure Air. However please be advised that the plastic slide can only tolerate so much pressure before it fails.

All in all a side-arm for life! Enough of unreliable sidearms. Though saying that, I’ve played pistols as primary weapons for years!
I've built many pistols over the years and speak from experience. Investing in a Glock means access to one of the largest pool of readily available pistol upgrades on the Airsoft market.

Make: G&G 
Gun/Model: MP5
Accessories: Magazines  ,  swordfish kit  , spare hand guard , Angle forgrip 
Condition: used ( stock got broken at NAF so replaced with spare stock was 2 tone sprayed black )
FPS: 300-310
Splits/Swaps/Part Exchange: no
Price/Payment: 200ono

All Feed great (6th leaking mag has sold)

AliExpress ACRO repro red dot
 
As new, built up at home but never fielded/been outside.
 
Crisp dot, only very light blue hue to glass.
 
QD co-witness mount, solid.
 
Fully functional with spare battery.

Here is my awesome Cyma MP5 Blue edition heavily upgraded by DCA with Titan MOSFET.  It comes with all the stick mags in the picture and one Lipo. It’s a beast! including MLok rail and red dot, also you can see the front and rear sights have been removed the way SO19 did years ago to ensure better sight picture and cheek weld when firing. Folding UMP stock comes with it but I also have a J Stock to include with the package. Overall, I’ve used this a couple of times on the field and it is a laser. The internal upgrades from
DCA make it such a beast on the field. I just don’t get the use it deserves. I payed 1k for it from DCA but I’m not expecting that back for it now. My asking price is 800 but open to offers as I’ve removed the Midwest rail and put that on my GBB MP5. 

● JG MP5 Aeg Full Metal

Metal Body/Metal Furnishings
Retractable Stock
G&G Cold Resistant Blue Bucking + Nub
Fully Serviced
200rnd Hi Cap Magazine
Safe/Semi/Full Auto
Mini Tamiya Battery Connector
Used Condition
Velocity: 350FPS Using 0.20g
£110 Collected + £9.95 p&p via Parcelforce48 
 

Selling my TM AUG High Cycle 
 
Comes with
1 TM High cap 
5 Classic Army High Caps 
Virtually new only been used in a handful of gamedays.
 
 

Lovely cqb gun and does work outdoors too, not 100 percent sure on everything that's been done to it other than the Gate merf think it's got an upgraded motor and barrel but not 100 percent so selling as if it doesn't! 
Can chuck in a black ferro slingster for the asking price
Comes with 
 
8 mags
4 work flawlessly
Some have weak springs so dont feed the last few bbs but ill chuck them in anyway as good to have back up mags
 
Open to offers
 

Gun firing at 296 FPS using 0.28 g BBs thats the legal max i.e 350 FPS on 0.2g BB
 
trade possible at equivalent resale value 

test video available is you supply whatsapp number

Package consists of the following

GHK m4 GBB £740
Angry gun wire cutter front rail £200
Magpul MOE pistol grip £25
Magpul M-Lok Handstop £40
Magpul RSA Sling loop £30
Spare standard nozzle £40
Spare High power nozzle £30
6 new magazines at £85 each £400
Firewolf 3x28 sight £70
total cost is £1645

yours collected for £775  posted £800 due to the value collection is recommended but i will post

This is my custom joker style aap01 I think this will intrigue some people £55 including postage. Comes with 1 magazine with upgraded gas router. will do £50 for pickup.

Here i have my tokyo marui m92 resident evil collection with 2 leakless mags. Looking for 150 ono and will accept trades.

Here is my custom Hi-Capa made from an Armorer works hex Hi-Capa.
I literally never use the pistol and want to build a hpa AK.
 
Shoots really well, very snappy and super lightweight!
 
I have reduced the price £50 due to the ambi safety snapping (note this doesn't affect use just the right hand safety doesn't do anything) & no mag (I purchased 3 vorsk mags that dont feed in it 🙃)
 
Parts below:
- Cowcow rainbow hammer - £45
- Cowcow rainbow guide rod - £35
- Cowcow rainbow trigger - £14
- Laylax rainbow mag release - £39
- Cowcow short stroke kit  - £10
- Cowcow guide plug - £9
- Cowcow rainbow grip screws - £12
- Cowcow rainbow magwell - £50
- Airtac skeleton grip -£50
- Airtac fluted outer barrel - £25
- Autobot bucking - £10
- Trident sear spring - £10
 
Base:
- Armorer works hex Hi-Capa - £150

If you want to get information about whole firmware, visit my other advert, where I offer firmware without hardware!

I offer a programmed RFID Domination Timer prototype - a timer in the style of a chess clock for Airsoft / Paintball with firmware for 2 teams - BLUE and RED, which play against each other and try to occupy a point and then keep it for the longest time possible.
A player of a team occupies a point by placing his RFID card to the RFID reader, which beeps to announce the change on the point, lights up the team's LED and starts adding time to the team in seconds. If the card is placed by a member of the second team, the time of the first team will stop at the current value and the time of the second team will start counting + the color of the active team will also change on the LED point.

The maximum time for listing on the LCD character display is 99 hours, 59 minutes, 59 seconds. Stopwatches are thus also suitable for several-day events such as LARP, MilSim. Suitable especially for Capture The Hill / DOMINATION game mode. I am also supplying the machine code for the Domination Timer, which is already loaded into the unit. This will make it possible to clone the program to any number of other devices that you can create, and they will respond to identical RFID cards with identical configuration, so it is possible to create several Domination Timerpoints in your gaming area that will work independently of each other.

Together with the Domination Timer, RFID cards are also supplied, 7x for each team, 2x for the Referee and 1x for the Eraser. With his card, the referee can stop the game and neutralize the point (the current times remain written on the display), the counting is reactivated by applying the team member's card. If Eraser applies his RFID card, the point is reset to 00 h, 00 min, 00 sec.
The hardware is mounted on a PCB (104x101 mm), while the main components (Arduino Nano, LCD display and RFID reader) are mounted on pin strips. Thanks to this, the components can be replaced with new ones in the event of a malfunction without the need for soldering the components, they are simply pulled out of the slot after unscrewing the component from the spacers. The DPS also has the option of adding two pullup 10K resistors for the I2C bus SDA and SCL signals.

System power via microUSB, average consumption approx. 50 mA at 5V power supply. The system can run for about 36 to 40 hours on a 2000 mAh power bank (depending on whether the LED is active - higher consumption, etc.). The device is plug n' play, just connect the power supply and operate.
I do not offer DPS design or source code for this product. The DPS has mounting holes in the corners, which are primarily used for distance posts, but adapters (extendre) can also be used for the possibility of mounting on the wall, etc. The device must be operated indoors, the device is not supplied with a box, the device is neither waterproof nor waterproof. Domination Timer has acrylic front plate that is transparent, there are used extra pillars to hold it on PCB.

Supplied hardware (hardware soldered onboard):
PCB 104 x 101 mm Arduino Nano V3.0 (Old Bootloader) NXP RFID RC522 (13.56 MHz) Passive buzzer (2 kHz) 2x LEDs 2x primary resistor LCD character display 20x4 with bluebacklight Pin strip 2 x 15 pin, 1 x 8 pin, 1 x 4 pin 90° 17x RFID card of compatible ISO standard

Around 40RPS, 350FPS, Instant Trigger Response. 
 
With the hair trigger  and feathering you can semi at around 25RPS.
 
Build professionally.
 
EdGI Custom Barrel 85 PROMETHEUS Hop Chamber 46 PROMETHEUS Bridge Nub 12.98 PDI Bucking 7 RETRO ARMS CNC Gearbox 125 PROMETHEUS Selector Plate 15 GUARDER Tappet Plate 9.99 RETRO ARMS Bushings x4 11 EZO Bearings x2 9 MAXX Nozzle 8.49 SHS Cylinder Head 12.79 PDI Cylinder 18 MODIFY Piston Head 16 CYMA FMR Piston 9.49 GUARDER Main Spring 12.3 SIEGETEK DSG Gear Set 149.99 LONEX ARL 9.9 WARHEAD CNC Motor 125 MAXX CNC Advanced Trigger 26 GATE TITAN Advanced 125 PTS EPG-C Grip 25 RETRO ARMS Fire Selector 14 RETRO ARMS Selector Cover 3 RETRO ARMS Trigger Pin 17.99 RETRO ARMS Mag Catch 20.2 Labor 250 CERAKOTE Painted 250 Krytac PDW 339.99 7x Lonex Flash Mags 163.17 5x Batteries 102.46 LiPo Charger Dual  79.99 Lipo Fireproof Bag 14.99     Total 2114.72      
 
Paypal & Post (Included)