Niron
-
Posts
13 -
Joined
-
Last visited
-
Feedback
0%
Niron's Achievements
-
Time Left: 2 days and 22 hours
- For sale
- Used
My beloved T11, unfortunately she is just collecting dust and going to waste I've spent a lot getting what I wanted out of this rifle it has a HEN LI HAI Maple Leaf Hair Pull Trigger, Crazy jet barrel, uprated cut down spring, uprated aluminium Piston, Cant remember what hop up rubber is in there but it was perfect, Nikko Sterling Medium Range Optics, the gun also has a brand new Receiver from AA since my one came defected in the box it also has a Stainless Steel Cylinder, fps was perfect as well last time I tested it, its obviously been sitting for a long time so spring probably wont be as strong at it was, I've used the rifle a few times on the field and its lovely it also has 3 magazines, lighter than the Novritsch SSG-10 probably not as accurate as the hop up assembly is still original, calls are welcome or messages to my Mobile Number. I'm not comfortable posting this in the UK thanks to the pathetic services so Collection is PREFFERED. offers are welcome.£300
Hawick, Scottish Borders - GB
-
Time Left: 2 days and 21 hours
- For sale
- As new
Here is my Brand new Novritsch SSG-10 the rifle has not seen the field, I bought it as a back up to my t11 as I wanted something smoother only thing extra on this gun is a Maple leaf Crazy jet barrel, suppressor and Long range Theta Optics scope with a very nice Bipod, reason for sale is all my rifles and gear is gathering dust I don't have time for airsoft on a Sunday anymore unfortunately, again this rifle is BRAND NEW never seen the field£280
Hawick, Scottish Borders - GB
-
Time Left: 2 days and 21 hours
- For sale
- Used
Very nice pistol I only have 1 magazine for it, not used it in at least 7 months so will need to re lube the gas seals on the magazine and give her a clean and lube, comes with a Romeo3 Remake sight its not the real deal but it is very nice and feels like quality, the battery is dead in the sight, you get everything you see in the photo and the Manuel, Collection Preferred.£80
Hawick, Scottish Borders - GB
-
This advert is COMPLETED!
- For sale
- Used
Cyma bolt action rifle with suppressor, it has 0 magazines, low fps and just want it gone rifle has been gathering dust, used in a airsoft match twice. Collection preferred. THIS IS NOT THE UPGRADED VERSION.£100
Hawick, Scottish Borders - GB
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- As new
Actually brand new gun not even been In 2 matches has some issues with the gearbox probably will need a rebuild/reshim on that but other then that the frame is actually pretty mint looking for 50 not including postage and you can get everything you see in the photo just not my shoebox or my bed, no battery's included. Can post but collection preferred£50
- GB
-
Rogerborg reacted to a post in a topic:
Action Army t11
-
So i did what u said i took it apart again and put it all back together, the spring guide only slides in there is no proper seating that i can see in the cylinder it just sits on the back of the bolt handle i then deliberately put the piston in a different rotation so the trigger has something to latch onto, and it worked for about 4 shots after that it started slamming the bolt back into the cylinder so i think i found the problem and its the piston wearing out after a few shots. So a new piston is definitely needed.
-
Alright so a new piston and spring guide is on my shopping list. Im not sure about a spacer but its only the spring guide back there when i tilt the cylinder upside down its the only thing that falls out, I’m assuming with the new spring it might be pushing the spring guide a bit more back because i have to use quite a bit of force to get the sear back into the cylinder once the trigger assembly is on.
-
Well thats weird because I’m suspecting thats it is my trigger or the spring guide that’s just not putting the piston in the right place for it to latch on properly because it does click but any slight movement will slam back the piston and bolt, Have u replaced your spring guide or is it still factory? and the piston is still factory because my pal said he used his t10 with everything stock for a while and it was fine, i assumed the t10 and t11 are internally not to far apart but im not sure anymore. also just to add ive noticed the spring guide is not straight its sits skew in the cylinder, the piston also gets really banged up by the looks of it 🫣
-
So I recently purchased a AA T11 brand new sealed out the box ofc, out the box it shoots 200fps which is pathetic NOW i do get they cant really sell high powered guns because of regulations and all that I completely understand that, and all the internals are plastic(spring guide, piston) now today i received an M145 spring to put into the rifle so that i can actually hit targets without spraying and praying, now here is the big issue that i find with this gun, It is impossible to upgrade the gun out the box im not sure if its a tolerance issue with the diameter of the cylinder or the spring guide but the stock trigger will not cock the gun it pulls back but immediately slams the bolt back into the cylinder, so i take this as the gun is not upgrade compatible out the box without changing the stock 0degree trigger and the cylinder with the spring guide, so basically DO NOT BUY THE ASIA VERSION OF THE T11, if you can get the American version its alot more expensive but i would assume that out the box its not such a pain to work on and it should at least shoot straight, i am extremely disappointed in the t11 seeing as i have to go blow even more cash on the gun changing every single internal part, the whole reason i bought the t11 is because it came stock with a 0 sear so that i didnt have to go an buy an expensive aftermarket sear but now i do anyway, just a heads up for you out there looking at buying the asia spec T11, Any help is more then welcome for all you airsoft pro technicians out there!!
