acrxil

Yeah from what I've read about on other forums and discord groups usually you have to stretch the bolt stop spring to prevent it from preemptively catching the bolt

I have just had my APFG Rattler delivered today and I am over the moon with the thing! Build quality is insane and it is rock solid, I spent some time cleaning all the icky factory grease out of it and using some gun salve to re-lube it. A massive thanks to @WilloJayfor making me some extended screws for the hammer connector, I made sure to loctite them before testing. After all that prep I chronoed it and holy sh*te does this thing kick, and fling bb's at some insane speeds. Stock with abbey red gas and the suppressor installed I was getting 370fps on .32's? I haven't fiddled with the NPAS at all to bring it down but I'll list the out of the box findings below: - STOCK w Suppressor and Abbey Red Gas - 370 - STOCK w/o Suppressor and Abbey Red Gas - 305 - STOCK w Suppressor and Abbey Green Gas - 320 - STOCK w/o Suppressor and Abbey Green Gas - 270 All the test's I've run were with .32's and it was very under-hopped, so I will see if I can get a consistent hop with a good fps in a mo. I was using a standard VFC gen 3 mag that came with the gun for each test, I do have some VFC Gen 3 V-Mag's that I'm going to test to see if it has any impact on performance. I doubt it but its worth a test ?‍♂️

I have heard of people getting away with using the stock nozzle spring, however with green gas it is very likely to break. A lot of people run the Bav-Tac nozzle spring or dynamic precision, I havent heard anyone's review of the eagle six one but I know the guns modify nozzle spring is super stuff and a pain to install so a lot of people say to keep clear of that one

I had a pair of bloc glasses, have you tried stretching the nose bridge so it sits lower on your nose?

First time spraying my rifle, I think I will be spraying the rest of my collection now?

Are you running everything else stock? Was looking at getting a PDI barrel and a new nub but wasn't sure if the hop window is too small/big for certain nubs

Has anyone tried or reviewed the Jaeger Precision Titan Nub?

I mean if you're looking for affordable mil spec eyepro could just get a revision sawfly set comes with 3 lenses and a neck strap, never failed me once

I have owned both the venom and the Fortis and in all honesty I much preferred the venom mask, I may be one of a few but I found that the Fortis' nose protection ended up giving my eye pro a big fog problem, as soon as I swapped to the venom mask it was as if I wasn't wearing any face protection at all. Both are pretty comfortable (although I run a helmet as well so I feel @GeorgePlaysAirsoft pain) you can sit the mask just right where it sits under the helmet strap and I found it to be pretty comfortable when moulded and you have worked out the placement. Admittedly they are pretty pricey but I have tried so many different variations of goggle and mask combos to get rid of fog while keeping comfort and protection in mind, and this is definitely imo the best solution. I may be lucky because I have never been shot in the nose with the venom mask on, yet I have had a fair few mouth shots and was thankful to be wearing something. If you are thinking of getting one of these masks DO NOT pay for their balaclavas, you can literally find exactly the same one on Amazon for a fiver in multiple colours, I realised this after I purchased smh