n00b1982

Is your issue transport? Theres a number of sites within a little over an hour of Colchester - I travel from Clacton to many

Hi all, I have a TM Saiga 12k, and have purchased an FCW triangle stock which was advertised as a direct fit. It is NOT in fact a direct fit ? Im trying to find someone (hopefully near Essex) that may be able to help install it - paid of course lol. Any recommendations please? Thanks

thank you buddy, Ive ordered the PTT and I will test with the downlead once it gets here, from memory it’s a different lead but I may well be wrong lol

Do you happen to have a link to that PTT in the interim? May just order that knowing I then just need the right downlead, or was it modified? Cheers

Appreciate the guidance buddy - thank you!

I appreciate it buddy, and didn’t want to come across as being a dick lol - hopefully I haven’t. I do also understand the clarity on the license question as I know that many don’t and quantifying it can be important. Im just frustrated myself, as I’ve gone from the Baofeng which was OK - until it wasn’t. Then trying to upgrade the equipment to something better, and I’ve thrown myself in to a different world in real terms to what I’m used to. Its then difficult to try and get the clarity because retailers only relay certain information, so I guess I’m looking for some real world experience rather than buying something that simply won’t work lol. Hahahaha, Please see previous. Genuinely not trying to be a dick - just trying to get an answer so I can buy what I need ?? And forgive me, I missed your question - it is the TCA

Hi again, In the nicest possible way is there someone that can actually help me with my ACTUAL question. I made clear in the original post my previous setup was run for 4 years. Could it be equipment for range loss? Yes. But that’s also not the question I’m asking. Ive already bought the other radio and I’m asking for recommendations about what PTT and downlead combo would be best to use around the setup. I know how to setup the frequency already, I just want recommendations on what I’ve asked lol.

Appreciate the honesty - however I’ve already bit the bullet so to speak and spent on the radio anyway. Ive just been upgrading my gear rather than my guns for a change ??

Hiya, Yes the team has a license that gives a “frequency” to use from my understanding. in terms of what I mean by range I may not be using the correct term, but Incan be less than 100m from my team and they can’t hear me. I’ve tried several different antennas with the Baofeng, but just though either way if I’m upgrading stuff then I may as well with the radio too. Any advice on what to use in terms of PTT/download for the setup?

Hi all, So I’m looking to get some help/advice/assistance around my setup as I’m tying to “level up” the kit I’m using. I have a set of FCS AMPs that I’m currently using. I have been using the Baofeng PRC replica, but found that I’m getting issues with range so have just purchased the Falcon 3/Harris AN/PRC152 Walkie. Im trying to see which cables I need and a good PTT recommendation to use also. I was using an Earmor PTT which has lasted me 4 years with no problems, but this is not bviously incompatible with the 6 pin connection required for the Harris Radio. What leads do I need to get, and which PTT would you advise? I’ve seen the FCS V20 6 pin, but unsure where to go from there. I will only ever be running the one radio. Thanks (hopefully) for the insight.

Hi, Looking to see what upgrades people would recommend for the above gun? I’ve seen a video from Jaeger Precision about the maple leaf hop chamber, but not seen the follow n he mentions to see how it performs. Im assuming the Flamingo Pink hop rubber is the go to still these days? Maple Leaf Crazy Jet Inner Barrel (can’t see if the concept of these really makes a difference or not?) Thanks

Hi all, as the title suggests I have a Warrior DCS and am looking for a suitable QD cummerbund - preferably solid rather than webbed, in MC. Anyone bought one/can recommend one? Links also appreciated. Thanks

Thank you for this. Can you just clarify which tabs? Do you mean the clips on the bottom that are hinged in on the bottom edge? Just don’t want to break anything in the process ??

I’m basically looking to move the entirety of the internals of the magazine in to a new shell as the magazine has broken on the lug side.

Anyone done this? have managed to remove the bottom plate and the valves but still nothing budges. Mag dropped in the floor which ended with missing plastic in front of the bb channel so they drop out. Ive purchased a new magazine shell, but have no idea how to take it apart, and can’t seem to find a video on YT either. Any help appreciated. Thanks