quango2k

I was more talking about the tiny rail and a long range scope lol all kinds of frankengun going on. Keep doing you lol. Fyi buddy, those anti rotation screws are supposed to be metal. Just use them, mark the body..it don't matter..its gonna get dings anyway. You should be able to lift .46 with the brass nub and reach 70m. Worth trying.

What on earth is going on here lol

Are you using a genuine TM speed loader? I have a nuprol one which is next to useless and my TM one works perfectly.

She is complete.....for now.

It's a difficult fit but goes in. I have one for sale in the classifieds if you want one.

They are absolute shit lol. I have had loads of AG parts, all but one of them have problems..they clearly test nothing! There is no other explanation for it. Ag nozzle, weird full auto so removed. Ag bolt (sf version) piston wouldn't fit, also spring retainer wouldn't go in without modding. Ag outer barrel, hop issues when installed Ag maritime bolt catch, sticks out about 3mm more than a real one, so you cannot wind the mag release enough to seat it properly. They even admitted to me they screwed it up! Ag mag release, fell in half first use lol..pin just fell out! Ag charging handle, roll pins just fall out Ag lightweight bolt catch, needed heavy filing to move freely. Ag urgi v2 rail, will not fit an mws without their adapter ring which only comes with their outer barrel set which causes hop problems! The v1 rail was fine and had a more durable finish. Saying that, my flash hider is perfectly fine, even they would struggle to fuck that up. They clearly make things based on pictures on the Internet, this is why everything is out of spec..then they clearly do not test finished products on a base mws but on modified ones made from their parts. I hope they go out of business.

The z-parts urgi rail 100% fits the mws perfectly. Look at groots Post a page or so back. I installed it and it fits perfect.

Mine is finally complete too! Still might change the grip back to black like real URGI rifles I have seen..

Hi all, I have just put on a 14.5in outer barrel and want to get an inner to match. Any recommendations? and will it lower the power a bit putting a longer inner barrel in? as I am pushing it with the power even with an npas.

What I was lead to believe is... If you have first gen mags, you cut the pipe and no o-ring. That allowed a decent volume of green gas. For gen2 mags, tm modified them to stop green gas being used due to power limits in Japan. You no longer need to cut the pipe but need o-rings to allow a fill.

I had the same. Some cans of gas just vent when filling. I wasted over half a can just filling mags. I fitted silent fill o-rings and now I waste no gas and its still pretty consistent on all 6 mags.

Offset mount arrived at last. Waiting on a 1.93 mount for the vortex in black and a 13.5 urgi rail. Decided to go long lol.. So if anyone is after a 9.7 geiselle rail it will be up for sale shortly.

There is no way that is slipping back down over time. Mine has not moved since.

HAO already did one and its available for sale now HAO's L119A2 CQBR Monolithic Upper kit (IUR) for Marui MWS | haoptw (haoptwart.com) beat me to it

with the V2 angry gun rail the PTS ring will not fit. I tried and failed. they have changed the profile of the inside of the barrel nut. the v1 rail fitted fine. you will need the mil spec AG outer barrel set which comes with an adapter. the guy I spoke to at AG said it will be included in the future with the rails...but that was just BS to get me to leave him alone. They are the worst! I would personally just wait and get the HAO.

If you wanna make your MWS suuuper heavy, go get yourself a Vortex! Christ it adds a chunk..I need to start doing pull ups! I HATE the tan (rose gold) mount so have another on the way and an arisaka offset to mount my t1...then I am done! maybe...kinda...ish.

Same, I have one. the fit to their flash hiders is a little loose but workable.

dont do it. the Angry gun MK2 rail is dogshit. they have changed the barrel nut so it only works with Angry gun spacers which you can only get with their outer barrel kits and do not include the spacer (they claim they will in future when I complained) The finish is crap, it scratches super easily. the bolts are still wobbly . I mean, it looks OK...but HAO is cheaper and waaaaaaaaay better! I got an AG high speed bolt...returned it. Junk like most AG parts. TM Piston wouldnt fit without modding as the body was too tight. AG piston was also tight but not as bad as the TM one. The key (the bit that holds the piston in the BC) wouldnt fit without modding. AG only test their parts with their parts. They do not check against stock parts. I have bought soooo many AG parts in the last few months. Only the flash hiders are any good, the rest (bolt release, mag catch, bolt catch, bolt etc etc) are all shite in different ways.

Angry gun are the worst. They test nothing! I have a never ending list of shit with problems from them. They clearly never test any of their parts.

I have one, pm me

i got the same one. A little bit of dremel work on the inside and it fits perfect and holds the buffer tube properly.

If anyone wants a real magpul SL grip or some original magpuls all In FDE..I've just put some on classifieds. I went crazy, bought too many

Silent fill o-rings...talk to me!!

Still don't know what NPAS to go for. I tried the v2 angry gun complete nozzle and that caused all sorts of weirdness so that's out the window. There seems to be 200 different types of G&P valve and have no idea what one is the one to go for lol

Its your fault he owns it lol..if you didnt PM me with the link to the sale we wouldnt have nabbed it FYI, the paint is gone already Needs paint Anyone running the Angry Gun high speed buffer? the spring inside it seems freeking strong..Cant help but think this will eventually crack the buffer tube cap.