tibernius
-
Posts
14 -
Joined
-
Last visited
-
Feedback
0%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Posts posted by tibernius
-
-
Got a bunch of stuff from Invader Gear on the way: a Reaper QRB plate carrier, cargo pack, 3 single 5.56mm mag pouches, and an admin pouch, all in Ranger Green.
Also ordered a 2L Hydrapak Force bladder - the weather's in the high 20s/low 30s now and the 700ml water bottle I'd been carrying wasn't going to be enough.
-
17 hours ago, Nathana94 said:
ive just got one of these to try in my specna and it doesn’t feed
do you have any feeding issues with yours at all? Granted I only loaded a handful of BBs to see if it fed them, but no luck! Not sure if that just happens on the last few shots?
Midcap or highcap?
I've had no issues with mine, but they don't feed 100% of the magazine - there's usually still 3-4 BBs left - so it might be worth trying it again with it loaded to about half. Typically when it stops feeding there will be at least one BB in the mag, but you won't be able to see any through the little clear plastic bit at the top of the magazine.
Gunfire always seem to be out of stock of the Specna pmag-style magazines that work with the 416 magwell. 😕
-
22 hours ago, L3wisD said:
You've got it right though, the 'M' designation simply stands for 'Magpul' - and has a Magpul CTR style stock as standard.
I always thought it was an MOE style stock. Doesn't the CTR have another latch at the front (rifle end) of the stock?
If you want to keep to the totally not Magpul style, then these magazines work: https://www.taiwangun.com/en/aeg-mid-cap/150rd-mid-cap-polymer-magazine-for-ar-15-m4-black-battleaxe-3
Patrolbase has them as well but they're out of stock at the moment.
Keep in mind that the H08 has an RAHG style rail, which is a bit of a pain to get attachments for - afaik you can't bolt anything M-LOK to it, you need to use RAHG RIS mounts and then put what you want on those.
Not necessarily a problem, but back when I got my H05-M loads of stores were claiming the H08 used M-LOK... 🤦♂️
-
Semi-necro, but I thought I should post what I ended up using.
I got 6 of these back in February, took a while to be able to test them but I can confirm that they work with the H05 (and presumably the other "old" Specna Arms 416s since they use the same lower).
Fits without any modification, holds in place, a little bit of wobble back and forward but nothing side-to-side.
There's also a 330rd hicap version, which I haven't tried but seems to be identical externally:
-
On 03/02/2020 at 12:26, rocketdogbert said:
Clone Vortex UH-1 to compare to the RS I already own, and a clone Vortex 3x magnifier
Don't suppose you still have a link to that set, do you? Does the UH-1 clone have the correct reticle?
-
-
Bit of an update on this one. I ordered a 5 mag box of the 190rd Modify XTC mags...turns out they fit fine, they stay in place but I can't get them to feed consistently. Best case scenario was getting 2-3 rounds out on semi, it wasn't keeping up with full auto at all - and that's with a stock Specna running a 7.4v LiPo, hardly a high RPS build.
A team mate said it's happened to them with other Modify mags in Specnas, and it seems to be down to the spring not being strong enough.
So now I've got to figure out whether to wait for Gunfire to get the 125rd Specna S-Mags back in stock, or risk the Cyma and Battleaxe ones. 🤔
On 04/09/2019 at 17:52, WarrantyVoider said:I use a CYMA hi-cap in my SA-H05 and it feeds perfectly so I'd imagine the mids will also work fine. I keep meaning to order the mid caps for it but never get round to it
My sons Valken Mags don't work, they fall out.
Are these the ones? https://www.taiwangun.com/en/aeg-hi-cap-magazines/350rd-hi-cap-polymer-magazine-for-ar-15-m4-black-cyma-2
-
11 minutes ago, Druid799 said:
Err fill them to the amount you want ? Wether there 30 rd’ers OR 200 rd’ers the outer shell is the same size it’s just the internal capacity is different , you want 70 rd mids then just put that many in .
Not Rocket surgery ?😁
Good point - I just know that there were some spring issues with midcaps (iirc it was the PTS ones?) a while ago that stopped them from feeding the last few rounds properly, so I'm a bit wary of half-filling the mags because of that.
-
Hi folks.
I've got a Specna SA-H05M (which seems to have the same standard 416 lower receiver as the SA-H02) and I'm trying to find some low/mid cap magazines for it - ideally PMAG or other modern polymer ones. Problem is, the only mags that Specna have confirmed work with it are 3 different STANAG hi-caps.
So far I've tried a Kublai 120rd Lancer copy (which doesn't lock and doesn't feed), a G&G Midcap (same problem), and the Modify XTC 190rd midcap - the only one of the three that worked, but seems to have little texture on the mag itself and is a bit higher capacity than I need. I've heard the CYMA mid caps work, but haven't managed to try one yet.
Any of you know any other compatible mags?
Load-Out / Loadout Picture topic
in Guns, Gear & Loadouts
Posted
What's the compensator on the HK45? I don't think I've seen an airsoft HK45/P30L with one before.