tibernius

What's the compensator on the HK45? I don't think I've seen an airsoft HK45/P30L with one before.

Got a bunch of stuff from Invader Gear on the way: a Reaper QRB plate carrier, cargo pack, 3 single 5.56mm mag pouches, and an admin pouch, all in Ranger Green. Also ordered a 2L Hydrapak Force bladder - the weather's in the high 20s/low 30s now and the 700ml water bottle I'd been carrying wasn't going to be enough.

Midcap or highcap? I've had no issues with mine, but they don't feed 100% of the magazine - there's usually still 3-4 BBs left - so it might be worth trying it again with it loaded to about half. Typically when it stops feeding there will be at least one BB in the mag, but you won't be able to see any through the little clear plastic bit at the top of the magazine. Gunfire always seem to be out of stock of the Specna pmag-style magazines that work with the 416 magwell. 😕

I always thought it was an MOE style stock. Doesn't the CTR have another latch at the front (rifle end) of the stock? If you want to keep to the totally not Magpul style, then these magazines work: https://www.taiwangun.com/en/aeg-mid-cap/150rd-mid-cap-polymer-magazine-for-ar-15-m4-black-battleaxe-3 Patrolbase has them as well but they're out of stock at the moment. Keep in mind that the H08 has an RAHG style rail, which is a bit of a pain to get attachments for - afaik you can't bolt anything M-LOK to it, you need to use RAHG RIS mounts and then put what you want on those. Not necessarily a problem, but back when I got my H05-M loads of stores were claiming the H08 used M-LOK... 🤦‍♂️

Semi-necro, but I thought I should post what I ended up using. I got 6 of these back in February, took a while to be able to test them but I can confirm that they work with the H05 (and presumably the other "old" Specna Arms 416s since they use the same lower). https://www.taiwangun.com/en/aeg-mid-cap/150rd-mid-cap-polymer-magazine-for-ar-15-m4-black-battleaxe-3 Fits without any modification, holds in place, a little bit of wobble back and forward but nothing side-to-side. There's also a 330rd hicap version, which I haven't tried but seems to be identical externally: https://www.taiwangun.com/en/aeg-hi-cap-magazines/330rd-hi-cap-polymer-magazine-for-ar-15-m4-black-battleaxe

Don't suppose you still have a link to that set, do you? Does the UH-1 clone have the correct reticle?

Leo Koehler combat shirt and Explorer trousers in A-TACS iX. Excited to see what the quality's like since all my stuff up until now has either been surplus DPM or really cheap 8Fields/unbranded stuff.

Bit of an update on this one. I ordered a 5 mag box of the 190rd Modify XTC mags...turns out they fit fine, they stay in place but I can't get them to feed consistently. Best case scenario was getting 2-3 rounds out on semi, it wasn't keeping up with full auto at all - and that's with a stock Specna running a 7.4v LiPo, hardly a high RPS build. A team mate said it's happened to them with other Modify mags in Specnas, and it seems to be down to the spring not being strong enough. So now I've got to figure out whether to wait for Gunfire to get the 125rd Specna S-Mags back in stock, or risk the Cyma and Battleaxe ones. 🤔 Are these the ones? https://www.taiwangun.com/en/aeg-hi-cap-magazines/350rd-hi-cap-polymer-magazine-for-ar-15-m4-black-cyma-2

Good point - I just know that there were some spring issues with midcaps (iirc it was the PTS ones?) a while ago that stopped them from feeding the last few rounds properly, so I'm a bit wary of half-filling the mags because of that.

Hi folks. I've got a Specna SA-H05M (which seems to have the same standard 416 lower receiver as the SA-H02) and I'm trying to find some low/mid cap magazines for it - ideally PMAG or other modern polymer ones. Problem is, the only mags that Specna have confirmed work with it are 3 different STANAG hi-caps. So far I've tried a Kublai 120rd Lancer copy (which doesn't lock and doesn't feed), a G&G Midcap (same problem), and the Modify XTC 190rd midcap - the only one of the three that worked, but seems to have little texture on the mag itself and is a bit higher capacity than I need. I've heard the CYMA mid caps work, but haven't managed to try one yet. Any of you know any other compatible mags?