Frank Castle
-
Posts
32 -
Joined
-
Last visited
-
Feedback
100%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Everything posted by Frank Castle
-
Interesting, your in the UK too aren't you. What fps are you getting with that barrel in mate, are you sticking to under 350fps or have you gone for a DMR build?
-
Sorry if this has been covered but what's the inner barrel length of the M4A1? Is it 370?
-
That's good to know, appreciate the reply mate. Seems a no brainer for me this compared to £600+ mk18 and Urgi mws's.
-
Is this a good option for the mws platform? I like the look of the mk18 but this is so much cheaper then any other mws. Any difference in performance over a mk18 or urgi gbbr?
-
Yeah i did notice that after reading a few posts on here and thought that was a little low, you do make a good point and probably makes sense to build the best 1.13j gun i can within those FPS limits. I assume the most usable range then would be around 65 meters as that seems to be the magic number for most of the TM guns i see after a few upgrades. Is a bit of shame as i quite fancied a DMR but if its not going to out range a decent AEG by much then its not worth it.
-
Hi all, great thread and it's convinced me to pick up a TM MWS GBBR. I was looking at a DMR build, site limits are 1.48 joules for a DMR at 400 fps on .2's. FPS chart below. I was wondering how far i could get bb's out to (Flat trajectory), on those fps limits - is 80 meters achievable? Would it be the following upgrades, Tightbore barrel - any suggestions on bore size and brand? - I could run a longer barrel into a suppressor if it helped achieve greater range. New nub - SiXG? New hop rubber - any suggestions NPAS - i think we have a few options now, is RA Tech the best one? What weight bb, i assume maybe .4's or as heavy as the hop can lift. Has anyone built a DMR, any suggestions? Looking at the m4 or the MK18 GBBR. Any help, info etc is much appreciated. Thanks, Mark
-
This advert is COMPLETED!
- For sale
- Used
DYE i4 paintball mask Great condition Never fogged The odd scrape/scratch on the lens from brambles etc, only minor scuffs. Lens are interchangeable Comes with drawstring carry bag/protector Can post£50
-
This advert is COMPLETED!
- For sale
- Used
Stalker Tac 41 piston Spring guide Spring spacer Two cups, one Matte finish for a quieter build and one in gloss for higher fps builds Two airbrakes, long and short Two gbb airbrakes long and short Plastic and steel weights, interchangeable so plenty of customisation.£50
-
Hi, what useable range (flat trajectory) are you getting with this? -
This advert is COMPLETED!
- For sale
- Used
Removed camo paint back to black. SSX-23 Modular suppressor Two mags - one leaks. DTS holster Holster Molle Mount Pistol carry case Novi 36.g bbs, 90% full - see pics. FPS is a little low on 36g bbs (should be 261 on 36g) but shooting abount 45fps less (215ish) see pics below. To be honest I haven't serviced it recently as I don't use it anymore - just needs some TLC I can provide a video of it shooting if requested. Collection or postage is fine if buyer covers cost. Gas mags will be emptied before posting so refill mags soon as you get them. Any questions just ask£80
Woodbridge - GB
-
Good to know, thanks mate. Agree, from what i've seen online plus shooting one at my local field i was left a bit underwhelmed by its performance. For CQB it's great and i know that's what their designed for but for that price point i'd have liked a little more range tbh.
-
Ahh i did toy with the TM P90 TR but preferred the look of the MP5 SD6 but your right, the P90 does give me more of what i want performance wise. damn you lol. Will have a rethink. The price of the TM P90 TR is around £250, seems a bargain to me. I guess most would say maybe just a nub upgrade and hop rubber is needed but i wonder if its worth doing anything else? Thanks for your replies so far mate.
-
So is there anyway to rectify the issue of the hop unit/adjustment arm to stop that movement from happening or will even a new unit/arm not even solve that problem due to the make up/design of the MP5 body? I'd love the NGRS but for the price i'm not to sure i can justify it when i don't get to play enough plus i have seen a few videos where effective range is max 40m where i'd like it to be closer to 60m (if possible) for it to be viable at the site i go to. (hence the cheaper MP5 option but upgraded).
-
Thanks BigStew + Esoterick, appreciate the replies :). I was hoping the noise would be more of the TM P90 TR which does seem quieter than most AEG's, maybe its just a different type of sound rather than the whine some AEG's can make? Would you stay away from the plastic ICS's or are they pretty solid these days? Cheers.
-
Hi all, I love the look of the MP5 SD6 (probably from playing COD4 back in the day) and want to pick up an AEG version. I play on a woodland site so would like to get as much range as possible out of the gun, i'm not actually to worried about rof. I'm happy to get new gears put in, shimmed and a brushless motor (Just to make it a bit quieter), longer barrel run into the suppressor, bucking, piston, spring etc etc and anything else needed to get as much range as possible and make the gun as quiet as an AEG can be lol - so the question is what would be a good base model? TM AEG (not the NGRS), Cyma, ICS, VFC or G&G? Any upgrades you think i'll need that i've missed above to achieve this? Many thanks in advance for any suggestions
-
This advert is COMPLETED!
- Wanted
- Used
Hi, i'm after a used G&G CMF-16. Please get in contact if you have one to sellNO VALUE SPECIFIED
-
This advert is COMPLETED!
- For sale
- Used
Bolle X810 goggles Only used twice. Great condition. Can post.£40
Woodbridge - GB
-
This advert is COMPLETED!
- For sale
- Used
Scope 3x-9x 50mm | Illuminated Mildot Reticle 1x Flip-up Cover, lost the front one but there is a kill flash on the front anyway. 2x 25mm Scope Mount Rings Eye Relief → 80mm Can post if needed.£50
Woodbridge
-
This advert is COMPLETED!
- For sale
- Used
Silverback A2 SRS COVERT 16" Great condition, its a hard sale but I don't use it anymore. Great condition. Comes with: •5 springs, M140, M150, M160, M170 and I think one is a Rapax(M150) •Sniper mechanics WASP piston •Sniper mechanics Spring guide •Spare weighted sleeves for the piston and different length airbrakes. •Stock cylinder •Stock piston •Stock spring guide •TNT barrel (not currently installed) •Two TNT buckings •Silver back 60 degree bucking and nub •Two Faceless 100 seal buckings, one currently installed. •Faceless 70 degree r hop patch (installed) •Stock hop unit installed plus one spare. •Spare hop adjustment screws •Fast hop unit with Faceless FOW nub •Spare - G spec outer barrel with carbon fibre extension and foam baffles •4 steel mags with bb followers installed •Muzzle flash with spare shims for timing. •Bi pod, mint condition. •Plastic dust cover •Vauban bolt nob •Stock bolt nob. •Thread protector •Monopod, scratched where it was removed from the gun •Monopod plug inserted Shoots 323 fps on .45g Geoff bbs. Great gun and in great condition. Any questions just shout. With a silverback qd suppressor this gun is whisper quiet. Open to offers. Message me on here or on my mobile 07713246153£475
Woodbridge - GB
-
This advert is COMPLETED!
- Swap only
- Used
Looking to swap my upgraded SRS A2 Covert for a VFC avalon or a TM416. Please see my SRS add in the sale section for full details of the gun and what's included.NO VALUE SPECIFIED
-
This advert is COMPLETED!
- For sale or swap
- Used
For sale is my ARP 556, been skirmished once so in great condition. Brought just before I got into sniping and haven't looked back so it never gets used. Comes with everything you see in the picture. Would do a swap plus cash for a silverback TAC 41 or a G&G CMF16 I'll cover postage and PayPal fees. Any questions just ask.£250
Woodbridge, Suffolk - GB
-
This advert is COMPLETED!
- For sale
- Used
ASG CZ P-09 Gas blowback pistol Used so has the usual wear and tear scuffs and scrapes. Comes with holster, hard case and 3 green gas mags. One leaks. The other two did expel all the gas on Saturday straight away when I went to fire it (a few hours later, so they dont leak) but not sure if that's due to the cold weather as I only had green gas available that day. Shipment is £13 Parcel Force 48hr tracked delivery.£60
, Suffolk
-
Cheers for the reply mate. The WASP i had on before I changed to the TNT parts and it worked well so I'd be surprised if it was that but you never know Someone posted just above with the same weight bb's n joules and is getting almost double the distance so I need to figure this out lol. I might take apart the fast hop n try again. The Joules I'm getting seems OK so if I had an airleak would it not be lower? Same with the FPS output, it just seems like the bb's aren't being lifted well enough. That points to the fasthop, bucking and nub to me, what do you think? I might try the silverback bucking n nub on the TNT barrel like you mentioned and if that doesn't work I might try the old barrel on the fast hop, silverback bucking n nub. What distances you getting on your set up mate?
-
Hi all, I'm looking for some help. I've got the 16" covert with WASP piston and just upgraded to the fast hop, TNT barrel, TNT bucking and Tigra nub, M150 spring but I'm only ranging about 55 meters before the bb dips. (.48g, 317fps, 2.15j) I could only use 0-2 on the hop wheel before the bb's jam. I switched out the Tigra nub for the silverback one and could use 0-5 on the fast hop wheel but the distance was the same, 55 meters before dipping, I cant increase anymore hop so I'm stuck. To me with these upgrade I should be getting a better result!? I feel the gun shot better with the original hop, barrel, bucking. I may have to put that back in to test. Does anyone have any ideas? I was hoping to be nearer the 75 meter mark to be honest (flat trajectory) Another sniper forum i was on basically said my TNT parts were crap and not much better than the stock parts?
