P4radox

I decided to change it just to make sure same brand as the bucking the Maple Leaf bucking doesn't sit nicely on the Tm barrel anyways... Also mocked up a Diy Npas out of the stock valve ??? just to make the AngryGun Mpas nozzle set look funny?

The stock mws/marui barrels are beat rounds on the most "magic" inner barrels so generally doesnt make sense, unless you wanna play with the fps, though I changed for a Maple leaf 300mm one for this reason and because I running Maple leaf bucking (the bucking and your inner barrels mouth must to be matching and air-tight 100%) , its just depends on your upgrade parts. In order to find the best result in accuracy these things must to be matching : - Consistent fps (on semi auto) - 100% air-tight - barrel mouth+bucking+nub are match 100%(length,shape,tightness) + the nub contact on the right place with the bucking and the hop arm push it down from and in the right angle (check the laylax hop unit) So the end of the day the barrel length and diameter doesnt takes much without these things but not at all in my opinion.

Is this grip the BCM one?

Welcome to the club!

Yes ,thats true but one way or the other mocking always sucks , especially in sensible parts like hopup ... In this case I reckon easier to restore the original wheel which is handles properly fine bbs from 0.36g.

Yes ,just spoke about the Gunsmodify "Fine tune" wheel

Same problem, though I love GunsModify actually this wheel not able to lift up to 0.36' ,I use 0.30g and I have to turn up the wheel almost until the "knock" the effective province only the last 5-8 click and have no acceptable/stabile solution for. If you wanna use the orginal hopup wheel you should use the origi spring+nub the GM one too strong thats why it breaks the plastic wheel.

Yes the recoil less ,but its different ,return for faster and more snappy. So finally the enjoyment factor is increased ,more consistant less gas consumption I like it! Anyways mucking always ended up with sucks! Difficult to find out whats happened ,try to reassamble again!

Yes good stuff! This is gonna be my first winter with so I cant serve with comprehensive experiences but faster and the engaging points better if you gonna invest I recommend the AngryGun high speed Buffer to balance the less recoil.

When you see a lot of mws being sold...., you can be sure there is a crisis! ???????

Your welcome guys! I'll update again at Day 7!

Yeah..the reassamble is not pleasant but not difficult as it looks like...so the screw engage to the overhanging rod ,just need to find the good angle. Pmag update 2.5 : (2nd Day)still keeps!

Yes that O-ring is a piece of sheet.... But after 16 hours its still keeps in the 11g propane ! I will drop on the scale again few days later.

PMag update 2.0 Just solved the leakage problem! I need a few more days to make sure its reliable ... Probably they not gave proper attention for screw in....

Angry gun adjustable Nozzle or Npas or widebore barrel or shorter barrel (which is not the best option)or you have to wait until the winter brings the cold :,D Maintenance ,depends on what type of oil or grease you prefer . In my opinion: - Teflon grease on the Piston Head - Heavy Oil on the Trigger Unit - Light Oil for Bolt,Buffer Tube I hope it helps !

As I promised here is an update about the A1A SAA PMAGS! 0.30g BBs/Propane/26c° PMAGS: And with the Original mags :

Proper cqb length!???

Just run out of propane but Im gonna testing again soon, especially haven't felt this pmag-bolt issue but (I didn't focused on that ,probably they solved that)

Hi ! From rainbow8, currently idk check boomarms/rainbow8

Just got the new SAA Pmags yesterday, This is the updated version much better than the previous reviews ,was tested today in under proper war circiumstances, maybe the empty lever still needs some modification but haven't got serious problems with them, I need more time and tests before tell anything definitive ! (1st pic-> lower is the orginal one)

The main problem is the most of the sound comes out from the ejector,in case if you make some modification on the dust cover and you seal it properly can make sense...maybe..

Just back again ?! I have a Dynamic Prec. one for sale but if my mind serves me well UAC=DP

Whats happened with the cocking handle brada'??

Yeah I'll try as soon as arrive

Im wondering whether GG mod able to solve the recoil problem I think the gas tank is smaller