agors
-
Posts
17 -
Joined
-
Last visited
-
Feedback
100%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Everything posted by agors
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
Genuine Magpul G&p M4 moe Brushless warhead 20k semi dsg build G&p cylinder head G&p o-ring nozzle Shs tappet plate cut for dsg Shs piston head Cyma white fmr piston Solid bushing under the spur (loctited) Perun hybrid mosfet Short stroked retro arms trigger retro arms bolt catch Lonex 70d bucking Shs 18:1 7t dsg gearset Shs m140 spring Warhead 20k brushless motor Genuine Magpul from G&p in original box, comes with genuine Magpul hand guard, motor grip and stock. rear tan sight is a replica professionally built gearbox, by Dr.Airsoft can add the T1 dot for extra £15 Extremely snappy in semi, gbb-like. Infinite semi spam build, zero heat generation and ultra quiet. rps varies between 30-36rps depending on the battery used and can be programmed to slow down via rerun Collection from Shefford sg17 or can ship.£350
shefford, bedfordshire - GB
-
man don't do it. brushless are in every way superior to brushed. if anything remove those 13.1 and use 18.1 +11.1!
-
well yes because your barrel on a 7inch is only 20cm or so. definitely you're nowhere near that situation but that's a terrible comparison lol. if the OP has a 363mm+ barrel and using .32 or heavier bbs with -5 on sector then definitely it is to be considered. in any case case that is a corner case, without knowing OP setup it's difficult to help; independently it is a terrible setup (7.4v+13.1+brushless) IMO.
-
I mean, brushless motors have loads of torque and the setup is not great to start with. there's lots of torque and lots of inertia due to the low ratio Gearset. I really don't get why people use 7.4v with 13.1 gears. just use 11.1 and 18:1 gears. same semi time and way less strain on the Gearset and motor (building torque with gears, NOT with motor!) but again, if changing gears and battery is not a possibility then yeah the only solution is to short stroke and use a heavier spring. at some point based on BBs used and barrel length the cylinder to barrel volume ratio will be affected so short stroking won't be the best solution
-
it means everything is butter smooth in the gearbox, so well done lol. up the spring and short stroke the sector to meet fps. what barrel and bb weight do you use?
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- As new
Siegetek gear set ssg and dsg with Lonex spiral bevel. the ssg has been short stroked 4 teeth. Simply the best gearset on the market. £100+ shipping Bedfordshire£100
- GB
-
Dr.Airsoft Based in Bedfordshire (SG17) +using couriers Can service, fix or upgrade any RIF. Teching since 2008. Specialised in AEG, from milsim setup to High Performace DMR, SSG, PTW and DSG. I also design and print custom parts to be able to use mosfet on replica without support. e.g PDR-c or VFC MP7 AEG. website: https://www.drairsoft.com for more info get in touch! thanks! Giulio
-
This advert is COMPLETED!
- For sale
- Used
for sale a VFC VR16 with keypad rail. the body is in pristine condition, immaculate. the gun has just been serviced and it has: FMR metal rack piston 18:1 gears short stroked 2 teeth Perun in line mosfet shooting 330fps collection SG17 or can post for £15.£220
-
This advert is COMPLETED!
- For sale
- Used
5x KWA TK45 Mags in very good condition £40 Collection from Shefford SG175 or can post for £8.£40
-
This advert is COMPLETED!
- For sale
- Used
KWA RONIN TK45 pneumatic blowback used but in good condition with magpul PTS sights. very snappy with 7.4v and instant semi on 11.1v Comes with 5x 120 round mid caps the front pin chipped the plastic on the right side however it's just aesthetic and the bolt cover doesn't return smoothly. fires great at 335fps, great range and insane feeling, zero wobbles. can add 5x extra mags (for a total of 10 mags) for £50. wired to deans £250 Collection from Shefford SG175 or can post for £15.£250
-
anything can burn if not correctly installed; that said it should handle 11.1 with no issue (almost no point in a mosfet if it couldn't handle 11.1!) strain on gears and motors is nothing crazy and very normal today; any shs gears will handle that easily for a looong time.
-
are you strict to brushed? if not a 50k brushless 11.1 and 18.1 will bring you straight to 40rps. my opt.1 high speed (53k) did 42rps on 18:1 ss-4. no timing issue or any other headache. a 40k brushless will give you 33rps with 18.1 obviously it's easier to get high rps with a dsg but with brushless motors anything is possible today
-
agreed as above, however why 7.4v? first upgrade (if not standard nowadays really!) should be using 11.1v. if anything I'd go 11.1 and a 22tpa motor with 18.1 gears. if you don't have a mosfet a simple perun inline mosfet will do the trick.
-
This advert is COMPLETED!
- For sale
- As new
VFC VR16 mk18 dsg Dsg build with perun hybrid Shs cylinder head Shs o ring nozzle Shs piston head Cyma fmr white piston Shs tappet plate Shs 18:1 dsg gearset 22k neo motor Perun hybrid Short stroked trigger Vfc rotary hop up Maple leaf hot shot 50d bucking magpul sling mount tan mk18 rail tan MOE genuine Magpul stock moe motor grip body has been professionally re-painted matt black. professionally built gearbox, for any info: https://www.instagram.com/dr.airsoftuk?igsh=MTNleThzMW8ydHVxZw%3D%3D&utm_source=qr gearbox has been radiused, shimmed and lubed; motor tower shimmed and motor grip shimmed to body. very quiet and fast Very snappy semi and fast rof build; it does 325fps and 35-39rps depending on battery used. Insane range and accuracy using .28s. £350, collection from Shefford sg17 or can ship.£350
shefford, befordshire - GB
