EDcase

WE Mk3 Browning Hi Power

Comes with 2 magazines and Genuine PLCE Holster and case

Good condition with nice trades, some marks from use and everything working as it should.

Like all we hi powers it needs cocking before loading a magazine as that can break the Valve knocker, which a spare is included. Also like the real thing it can only be fired with magazine inserted or by pressing down on a lever in the magwell.

Any questions please send me a message

£100 posted UK mainland only.

Thank you.

In very good condition with rail riser and red dot sight.
 
Has also had an S Hop mod done so will lift .32 BB's easily
 
Boxes and all accessories included.
 
Colt 1911 2009 Rail Concept
Rail riser
Nano Point 3 red dot
Carry case

Key Information:
Full Metal G&P AEG. Customised. Skirmished. Sold boxed with extras.
No gearbox or motor - drop in your own.
 
Operator’s Notes:
Bought as a G&P M4 SF, a full metal rifle equipped with a 9.24 inch RAS.
The original foresight and barrel have been removed.
A shorter barrel (CCW thread) and low profile gas block have been installed. The original gas tube has been shortened to match.
The King Arms KX3 Fire Pig flash suppressor completes the improved front end.
 
Attachments:
King Arms Folding Battle Sights Knock-off Aimpoint powered by a short stack of those little button batteries. Single-point ambidextrous sling mount, installed to the buffer tube, and a sling. Makes the rifle really easy to position.  
Magazines:
3 x Canadian Style Midcaps. 1 x Marui Hicap. M4 Style Marui Speedloader Taped to avoid rattling around in the mag well.
 
Original G&P “SF” parts included:
Two additional RAS panels, for a total of four. One was sanded a tad to fit under a scope. RAS Mount Carry Handle / Rear Sight. Battery kit - a handful of clobber to make or fix your own Deans T battery pack that fits the stock.  
Extras:
A King Arms 14mm CW to CCW thread adapter, required to use the silencer with the original CW threaded barrel.
Inner barrel.
 
Notes:
The rifle takes a crane stock battery. Originally, using a Deans T type connector. With the rifle right way up, hold the back of the stock adjuster and hinge it downwards, then slide the stock all the way back, off the buffer tube, for battery access. Take care with the battery cables. The installed outer barrel is around an inch shorter than the original barrel. As a result, the inner barrel protrudes slightly into the Noveske Fire Pig Flash hider. If you wish to swap to a smaller flash hider (erm, why!? ), you’d need a shorter inner barrel. The buffer tube screws to the lower using a bolt that goes through the back of the gearbox.   
Presented in the original G&P box with manual.
 
Collection from Putney, London.
 
Add £30 for postage in the UK only, via ParcelForce 48. That includes the cost of a box and packaging material to make sure the original box gets to you in one piece.

Beautiful side arm and a real shame for me to part with as took a while to source this model. But time has come as all it does sitting looking pretty. 
 
Works perfectly and looks like new, holds gas and is snappy. 
 
Payment includes fees and p&p. Questions do ask and offers welcome but remember it costs fees and postage for me so dont be too cheeky cheers. 

Electric ak-47 semi and automatic 
Free postage 
 

I have two full upgraded tm recoils 
I would like two swaps for two hpa 
Or I'd like £3000 for both we can talk postage if your interested 
Reason for selling or trading is I prefer hpa 

1911 WE Hi Capa 7.0 Dragon, it was purchased for a CQB HPA tap project but I didn't end up doing it. I believe 
Only asking for £80 it was £120 new.

Here is my trusty G&G GC-16 Predator. 

It has a removed fire selector switch on the right side as I didn't like or use it, this has minorly affected the stiffness and clicky-ness of the fire selector, it doesn't always initiate safety however it is an easy fix if you know what you're doing. its had gearbox work done to it in the past, I couldn't tell you specifics but I know it has an upgraded piston and gears with an upgraded motor. A new OEM mosfet was installed after i fried the original one that came with it after that i probably played 3-4 games then covid hit and I haven't touched it since. maple-leaf hop-up. TNT titanium extended barrel running about half way through the suppressor. last time i checked it was shooting 344-348 so very consistent and pretty much bang on legal limit.

I honestly cant fault it in terms of operation other than the fire selector switch, it shoots laser beams and it served me well for the entirety of time i had it.

It currently has an original Magpul industires MOE stock with a LaRue Tactical R.I.S.R which i wont be selling with the rifle (I will install the original stock. however the rest of the accessories are staying on such as the Micro-T1 clone (not working) and the flip to side 4x32, The MOC grip, Foam filled suppressor and the paracord wrap on the handguard.
I will also include 4 plastic Nuprol midcap magazines (130 bb capacity) and 1 metal Nuprol midcap magazine (also 130 bb capacity) 
I do have more stuff for sale such as an OD Green plate carrier that weighs about 7KG with all the mags, and ammo which also has the sling mounted into it for the rifle.



selling due to not having the time to play in over a year due to getting into a different hobby and it hurts looking at it sitting there collecting dust.

collection only South East London based

Please contact me on whatsapp - 07474808247 in regards to more pictures as i don't have them on hand at the time of posting the ad 

 

Rifle has never been used on site, only at home/garden (due to covid)
Rifle specs
Comes with all the attachments shows on photos:
11.1V 1300mAh 15C LiPo battery Nuprol NP Point RDS Sight Ares Amoeba 170x38mm suppressor 3x300rd M4 VFC Metal Mags Tactical Aluminium Front Grip Single point sling Rail mounted lens protector

For sale.
 
A rectangular cardboard box. Good quality print work. A lovely shade of brown.
 
Comes with a completely crap king arms SAA. Would look good if you want something to put on your wall and show both your love for guns and your solidarity for the LGBTQ community with its rainbow colour scheme. 
It holds gas. When you pull the trigger some even comes out of the barrel. Though most goes somewhere else. Mostly on your hand. Hell, run it on propane, who doesn't want their hand to smell like rotten anus? Reminds me of when uncle Brian used to come round for playtime...
 
It comes with 6 shells, so if you are stupid enough to already own one of these then hooray, you have a means of carrying another 6 shots of bitter disappointment. And some spares so you can prolong your poor decision even further.
 
This one has been customised. Actually, I'm going to call it weathering. By that I mean I dropped it on a slab about 10 minutes ago by accident while trying to be pretty good. Turns out I'm not pretty good.
 
What else...
 
Oh, faux wood grips that look like they were fashioned from a mid 1990s rover interior.
 
It has a gun sock too to keep it looking pristine. Until you twirl it and it lands on something hard. Like a slab.
 
Or, for the teenagers browsing this forum, the sock could good for a wank or two while watching the free bit of porn that comes on telly between midnight and 1am because mum put a filter on the internet. 
 
So , what this is is a gun for everyone. Horny teenagers, the downtrodden, the weirdos and those who like something a bit custom.
 
So for this unique opportunity to own something I can't be arsed to put in the bin, I am asking for 35 of your hard earned (or if your furloughed, hard wanked) great british queens pounds please, that includes paying a man in shorts to come and post a sorry we missed you card through your letterbox and kick your cat in the face on the way back up the drive. And in return you'll get the most honestly described airsoft gun since jambwow discovered crack.
 
 
 
 
 
 

ICS M4A1 RAS folding stock model.Full metal and in good working order.This has the full metal RAS,metal folding stock,even a metal mag.It fires consistantly at 342 FPS.It has been subtly upgraded with a Guarder stainless tightbore,a maple leaf hop rubber and a lightweight steel toothed piston.A battery bag is now fitted on the front and is wired to Tamiya.Selling because I don’t need 2,they are reliable and a 2nd would not get used.
As usual sensible offers are invited.
Price includes all fees and posting.