Dannn

Trying for both accuracy and range, I know it's a g63 which is a short barrelled CQB toy, and it's mainly cq inside I'm playing but that little extra will always help, I'm hoping to get a little more fps with the tight bore too it's running 320-330 and our limit is 350 so I can go up a bit. Might give a prompt bridged a go then... I think it's a case of suck it and see Also it seems to curve to the right at its maximum range, never noticed that before !

I've just fitted this lot and threw 5 hi cap mags through it and I can't seem to see any difference shooting at the same targets at the same differences, only difference is I need to move the hop less for more hop... A 6.3 mad bull tight bore HSA M-nub HSA R-hop Z-Kit Prometheus Soft Purple AEG Bucking Lonex Hop Up Unit Fitted them all correctly, made sure the r hop was perfect not had it on the crono yet though

Exactly the same, the welts and bruses are what mine isn't keen on, especially the one I got on the face last night 😄

Sorted, there must have been an issue with emails ?

Got that mate, it's a residential address.

The delivery time isn't the issue, I've not even received mail stating they have the order, even though the money has gone from my account. It's the total lack of communication. Shame as I have 2 aeg's I'm spending fortunes on upgrading and they have some good stuff.

Anyone got any direct contact for air lab And an address? I bought stuff from them on Monday paid for first class delivery, had the money taken from my account but had no contact whatsoever from them, I've emailed and messaged on Facebook but still nothing.

Anyone got any direct contact for air lab And an address? I bought stuff from them on Monday paid for first class delivery, had the money taken from my account but had no contact whatsoever from them, I've emailed and messaged on Facebook but still nothing. This is a piss take, what sort of company is this?

The clue is in the title 😜

Is anyone as bad as I am? I do it before every skirmish haha!

http://www.eliteshootingcentre.co.uk/Gas%20Guns/Gas%20Custom%20Pistols/Items/Lev%201%20Custom%205.1.html I'm looking at one of those.. What's everyone's thoughts on it and has anyone had dealings with the company ?

I don't suppose it's a left hand thread is it ?

I've just rigged up a mosfet to a power source and wired it to s light instead of the motor and it seems as soon as I switch the power source on I get a very dim light but as soon as I connect what would be the trigger contacts it goes really bright, so question is are misfets supposed to let power through all the time ?

My tanfoglio mag was leaking, basically as soon as I fitted the cartridge all the gas fell out... It was leaking from the little doughnut shaped seal that sits around the "spike" So I made a new one... Ground the top off a gas Cartridge, got a drill bit the same size as the doughnut seal, drilled that in to the end of the cartridge and used that as a stamp to cut out a little ring of rubber... And to put the little hole in the middle, fit the rubber, take an old empty cartridge and fit it as usual and the cutter puts a little hole in it ! Job done. Grab a beer. Thank you.

It's not a standard motor lol It's a lonex a3

I've noticed a huge difference in trigger response by hard wiring everything including the fet apart from the battery with 14g wiring.

That was 18-1 gear set with neo motor and 7.4 lipo Got a spring and 13-1 on order 😜 if she's not hitting 50+ I'll be sad...

That is an awesome idea, rock up somewhere new and innilate them!

With 11.1 im getting around 40 odd per second , but that's testing it with a crappy iPhone app..I'm going to short stroke it with an m120 I think Do you think plastic teeth are the way to go on really high speed stuff so only that goes bang ?

I've set it all up.... Angle of what's it has been set, had a shim tastic time on it on it, new piston with teeth made from supermans shit, big fat wire all over the place and I've got a new one to drop in as soon as this one goes bang haha

Ahhhhh I've got 50c 11.1 lipos.. No capacitor needed then haha

All this info is great! I'm gonna girder a few capacitors too, I think I'll be able to fit them in somewhere !

What's the diode for ?

It took literally 10 mins to make, I put heat shrink over each joint then heat shrink over the whole thing. Seems to work as the gun works ! It cost about £4 and av half hour in total to do. All the parts were from RS components so all decent bits.

One none breaking mosfet made !