All Activity
- Past hour
-
killo joined the community -
Time Left: 6 days and 23 hours
- For sale
- Used
Ssg10 a2 with scope case an 2 mags . tm Glock 17 gen 3 with fronline hdl holster an warrior mag pouch blackhawk retention strap£400
- GB
-
Time Left: 6 days and 23 hours
- For sale
- Used
Bolt Midcaps Condition: Great Splits/Swaps/Part Exchange: n n n Price/Payment: £35 for all 4. Postage £3.85 I have 4 of these still available. Some info below: Abs case magazine mid-cap 120rd for Bolt, Marui Mp5 and compatible models Happy for collection from cv345hp or can post for cost.£35
Warwick, Warwickshire - GB
-
Time Left: 6 days and 23 hours
- For sale
- Used
Tokyo Marui Condition: Great Splits/Swaps/Part Exchange: n n n Price/Payment: £20.00 each Postage £3.85 each Hi caps. Great order for the recoil Mp5 NRGS. £20 each I have 5 of these still available - all hicaps for the NRGS system. All in great order and feed perfectly well. Happy for collection from cv345hp or can post for cost.£20
-
Time Left: 6 days and 23 hours
- For sale
- As new
Lovely condition custom dark brown Specter Elcan x 4 I paid £395 some years ago. Great trademarks and good quality as there was a lot of chinese early tatt about. Red dot works fine and lever shifts from 1 x 4 great. Note however, that on magnification setting, this doesn't hold zero and is misaligned - so I would treat this as a red dot or a wall hanger piece, unless you fancy having a go and correcting it. Price reflects this.£75
Warwick, Warwickshire - GB
-
Cannonfodder reacted to a post in a topic:
The 'What have you just bought' Thread
-
Time Left: 6 days and 23 hours
- For sale
- Used
Runs like a sewing machine, great range and consistent as hell. Bone stock other than the required gear changes in the magazine. DCA tube adapter with a CYMA compact stock, and additional side rails for the lighter look. PEQ15 included. OG parts also included. Modded to deans. 2 additional magazines for 3 total. Plus p&p.£875
-
The 'What have you just bought' Thread
Cannonfodder replied to Cameron364's topic in Guns, Gear & Loadouts
No pictures as they haven't arrived yet but I just picked up a pair of trousers and UBACS in British Opfor DPM -
Cannonfodder reacted to a post in a topic:
Storage. Not pews but everything else...
-
Austeyr reacted to a post in a topic:
What grinds your gears on forums
- Today
-
Cannonfodder reacted to a post in a topic:
What grinds your gears on forums
-
Shirt/Trousers for the larger gentlemen question
Punisher3990 replied to Punisher3990's topic in Guns, Gear & Loadouts
It is definately on my wanted list, I have always loved the MP5SD look, I would probably put the solid stock on there too. I think right now its between the mp5sd, the LVOA, and the p90 -
Cannonfodder reacted to a post in a topic:
What grinds your gears on forums
-
Cyma AK anatomy and installing wooden furniture
Cannonfodder replied to Andrus_Arseen's topic in Electric Guns
Don't cyma make quite a few AKs with wood furniture? -
Time Left: 6 days and 22 hours
- For sale
- Used
For sale is my Camofan’s Gorka 3 in Olive Green, I have owned this Gorka for around a year, and the reason for the sale is moving towards a more ‘sniper suit’ style of loadout, leading to the sale of this Gorka. The Gorka is in a great but used condition, with barely any wear, size wise I would say it is a solid small to medium, I have attached a picture of me wearing the suit, I am 5 foot 11 and weigh about 80 kg which should give you a rough idea, these suits are versatile and adjustable with lots of pull cords to get that perfect fit, additionally the Velcro arm patches have been removed for a more authentic look! I’m more than happy to deliver if local to Lowestoft in Suffolk, however I can post for an additional £7 via Royal Mail Second Class Recorded, if you have any questions, or require any further images or videos please contact me on here, thank you 😁£60
- GB
-
Time Left: 6 days and 22 hours
- For sale
- Used
For sale is a Cyma polymer handguard set for an AKS74, reason for the sale is I’ve upgraded to a wooden set on my AKS74N. The handguard is in a good but used condition, doing exactly as it would on the tin, I believe this may fit the old school type 56 ‘AK47’s’ and AKM’s also, I have added a photo of the handguard fitted to my AKS74N. I’m more than happy to deliver if local to Lowestoft in Suffolk, however I can post for an additional £3 via Royal Mail Second Class Recorded, if you have any questions, or require any further images or videos please contact me on here, thank you 😁£10
- GB
-
Sorry, I thought it's gas powered. In that case tbh I've no idea about how good a deal it is.
-
That looks so cool, is the lower frame from Guarder? -
Exusiai reacted to an advert:
E&L AK105 Zenitco build
-
Egon_247 reacted to a post in a topic:
Storage. Not pews but everything else...
-
Time Left: 6 days and 21 hours
- For sale
- Used
Victor optics 1-6x14 LPVO scope. Has a throw arm, glass is really clear. Comes on a clone geiselle high mount, missing 1 bolt. £100£100
-
Time Left: 6 days and 21 hours
- For sale
- Used
Helmet setup, unknown brand helmet, but new soft padding inside, fma amp headset, noise canceling and radio. Have rhe headstrap for it as well. Helmet is m/L, has an adjustable headstrap. £60£60
-
Shirt/Trousers for the larger gentlemen question
The_Lord_Poncho replied to Punisher3990's topic in Guns, Gear & Loadouts
Most of the above are a solid choice. I'd personally stay away from the VMP1 - you will probably get on better with an AEG as your first primary. Don't rule out the Cyma MP5 for outdoor play - the barrel length doesn't particularly make much different in airsoft to range/accuracy - the mp5 will be competitive in woodland. It has a quick change spring to tune your power level, and strips apart very very easily if you want to upgrade the hop rubber for greater range and accuracy (extremely easy). The cyma mp5SD that i purchased not too long ago had one of the best shimmed and quietest gear boxes from stock that I have come across. -
Time Left: 6 days and 21 hours
- For sale
- Used
Acetech lighter BT tracer, tracer and chrono via the acetech app. Has both 14mm negative cap and pistol end cap as well. Fully working £50£50
-
Time Left: 6 days and 21 hours
- For sale
- Used
Maruyama scw9 (apc9) fully working and upgraded. 6.01mm barrel, flamingo hop rubber, all internals have been polished to have a smoother action. Original outer barrel, new outer barrel with -14mm thread, spare back plate with 1913 piece for different stocks. Magpul k2+ grip, cut down foregrip. 3d printed suppressor. 4 long mags, 1 short mag, all gas tight and feed and stop on last round. Gun is fantastic, has really decent range for how compact it is. Also have a spare hop unit that I can throw in. £400 all in posted. the only trades I would want is a salvo mcx, lt or rattler. Any questions just ask£400
-
Baser reacted to a post in a topic:
Storage. Not pews but everything else...
-
glockkidd reacted to an advert:
Silverback SRS-A1 Sniper rifle plus hawke vantage+ scope, 2 mags, original box
-
andrey reacted to a question on an advert:
Custom stippled grips for you
-
Time Left: 6 days and 19 hours
- For sale
- As new
Hey trigger-happy mates! Want your airsoft pistol grip to feel like it was made just for you? I do custom stippling to give you that extra grip and badass look! Check out my work (and prices) on Instagram: https://www.instagram.com/gripstipp?igsh=a2Zib2ZnbnJra2d2 Message me on WhatsApp at the no. below if you want your gun to feel as good as it looks!£10
London
-
Time Left: 6 days and 19 hours
- For sale
- As new
Selling my M4 Marui MWS as l got myself an Hk416. I wish to sell it as a package, but, if you don't need some accessories, deduct the prices below. Base gun was a Cqb M4, bought new and used it at 4-5 games. The original front barrel set is included and all the others bits. It is locked to semi as it shoots about 400 fps, and being a gbbr, to use it wisely on semi only and get the maximum range from the setup. - Steel outer barrel (l don't know the brand), good weight on it to replicate a RS one. - Surefire Warden silencer ( it is the model without the flashider) (£15) - Maple leaf barrel and Mr. Hop hopup rubber. The barrel is long, goes up the the middle of the silencer - Geissele automatics airborne ambidextrous charging handle (£30) - KAC 8 inch handguard ( l don't know the brand - Magpul vertical grip (£10) - Hogue slim rubberised pistol grip (£20) - Sling swivel plate - Geissele trigger guard (£15) - Ambidextrous steel mag release (£15) - Ambidextrous steel fire selector ( £15) - Magpul EPS-C stock with Federal Concepts raiser (£40) The entire trigger box and the sears were fine polished, greased, the trigger reset is real magic now. The trigger box was slimmed down so you can take it out easily now, if needed (but l don't believe it will be ever needed again) Light Z plate by cutting down the inner parts. The bolt is stock except the new nozzle Guns modify ver.3 with steel insert on the bar that takes out the bbs from the mag. Up to here you will pay £595 one mag included. -Other 5 gas mags (£40 each, l don't sell it separately, only if the rif goes first) -Eotech Exps3 Holy warrior and G33 magnifier (£130) Buyer pays postage about £10 Find me faster at 07366595627£595
West Drayton
-
I already moved it once too 😂 -
Time Left: 6 days and 19 hours
- For sale
- As new
New in box 2x beautiful Hk416 A5 by Guns Modify gas rifle on the Mws marui system. Both come in their boxes with spare springs and one gas magazine. I have spare GM v3 magazines, £50 each Price is £645 p&p for each one.£645
West Drayton
-
Time Left: 6 days and 19 hours
- For sale
- Used
As l mainly use gas rifles, here is for sale my backup toy All works fine, recently serviced and checked, shooting 350 fps.. It has a custom paint job (battle worn) on a Ral8000 paint. It comes with 2 rail covers, the aluminium angle foregrip and the aimpoint compM4 red dot (a good quality one made by Evolution gear) One hicap mag included, no battery but l will send u a video with it in function before you pay it. Price is posted, find me faster at the number 07366595627£230
London
-
Time Left: 6 days and 19 hours
- For sale
- As new
Maruyama FMG9, one of the coolest and most unique airsoft replicas out there! Inside this futuristic transforming blaster, you'll find a VFC-made Glock, making it a beast in both style and performance. This is the best version compared with the other Fmg9 makers on the market. It is new, in the box, only tested. In the price are included 3 long gas magazines, much needed for your fun time. All new and gas tight. Price is posted. Drop me a message on WhatsApp at the number 07366595627 for more details.£335
London
-
Time Left: 6 days and 19 hours
- For sale
- As new
Rare piece nowadays, here for you l have this sniper rifle. It is not perfect as you can see in the pictures and read below but is functional. It comes with one gas tight magazine, the bipod and it has a new hopup rubber but l don't remember the brand. Fps is adjustable via the bolt screws, the mag is gas tight. The bolt has some play up and down and l have added a small piece of Godzilla tape collar to make it work as it should (more details on request). Also, the barrel had some wobble from the factory so l have added some velcro tape between the body and the barrel. Price is posted.£290
London
-
Time Left: 6 days and 15 hours
- Wanted
- Used or as new
Will pay for postage if necessary£270
London
