Specna Arms Mk18-based DMR
Serviced and Build to sell

- Fully upgraded -

FPS: 379-384 (for 400fps limit)
- can power up to fit higher DMR limits, if required

Functional bolt-hold-open feature

Brand New Parts;
Rear-wired (deans) Perun v2 optical mosfet
- currently set to: Safe/Semi/Semi
- can also set to: Safe/Semi/Safe, if preferred
- program card included

Perun v2 Clicker PRO

ZCI poly rotary M4 hop
Maple Leaf macaron 60 and XT omega nub
XT 22TPA high torque motor,

XT piston head,
XT cylinder head,
XT 21mm o-ring nozzle
ZCI 8mm bushings
JST m120 spring

Cyma steel rack piston
Solink 16:1 Gearset
- both short stroked by 2

FMA 107mm suppressor
TT Rail covers

FMA short grip
XT m105 spring
- power down to AEG ~330fps

Other;
ZCI 509mm Tightbore inner barrel
Rifle Scope (freebie)
- Nice and clear, however is slightly off and won't zero, so is mostly for show
- flip up end sight is effective enough, if you prefer to remove it

2x Hi-cap mags
including a brand new 370rd nuprol hicap

---
As stated above, this is a fully upgraded gun
Very easily powered down to aeg power limits with aeg spring included and quick change buffer tube system.
Then simply change the auto fire from safe/semi to 2,3,4,5 round burst or auto
I would recommend setting to 3 round burst for AEG power, and keeping the rest of the settings as is.

>Test fire video<
- test video is gun firing with; 7.4v li-ion, .28g, light wind, clear day, over long distance

I would recommend using heavier bbs than the .28g used in the test-fire video to get the most out of the effective range
would recommend .32g - .36g bbs
---

Rail has remnants of previously removed red two-tone, as seen in pictures
I will make efforts to remove as much as I can before sending,
however some red staining can be seen, and may persist, on the lettering.

Can also remove and clean up stickers on right side of gun if preferred
I was planning to take this DMR to a future game day in June, hence the branding ~~

Collection preferred
or
Postage: +£15

> See video for more test cycles/info <

Trades and Part-ex/trade-up available,
Within local or reasonable meet-up/half-way distance

Any questions, feel free to ask