Base is an old ics split gearbox and has been fitted with a wolverine inferno engine and is powered via a wolverine c02 stock and 12g c02 capsules. 

Has a ML crazy jet barrel and MAXX CNC hop up chamber complete with tracer led kit. 

Tracer leds are wired to the trigger, so will only light when the trigger is pulled. Power comes from a 3.7v lipo stored in the grip along with a separate 3.7v lipo for the engine. 

Comes with the following realsteel parts:

Unity/modlite modbutton, SF wiring

Unity hotbutton, peq/crane wiring, but modified with a 1.5mm jack (can easily be removed).

Magpul PTS B.A.D selector switch

Magpul extended mag release.

Replica eotech optic/magnifier included on rep wilcox mount. Original mount also included. 

4x 3.7v batteries (2 larger ones for engine and 2x smaller ones for tracer leds) including voltage tester and turnigy charger (lead not included)

4x standard mid caps (~120rd) and 5x shorty tan mid caps (~70rd) all metal. 8x ranger plates included.

100x 12g c02 cartridges.

Spare wolverine solenoid. 

It should be noted that due to the gearbox arrangement, the safety does not work. The gun will fire in mode 1 (single shot) in "safe" and mode 2 (3 round burst) in "semi" and "auto".

Unfortunately circumstances have limited the amount of time I can commit to airsoft these days, and this hasn't properly been used in some time. I have pressure tested though and there is no loss in pressure in the system.