Hey hi hello. I'm reluctantly selling on my gimped out carbon fibre and chrome M1A1 I purchased from a fellow user on AF UK the other year.
Its been an absolute joy to use and a real head turner. Most of those head turns were in disgust mind you. 

The base gun is a Cyma M1A1 with a King Arms Silver metal body kit fitted. The original faux-wood furniture has been Hydrodipped in a Carbon Fibre pattern and given a clear Cerakote top which prolongs the durability but as you can tell from the pictures it doesn't make it indestructible and some scuffs have gotten through on the bottom of the pistol grip and some tiny ones towards the rear left side of the stock, so I bought another set of Cyma faux wood furniture which I would use for skirmishes, and leave the previous gimped out carbon fibre kit at home for display purposes. This faux wood furniture doesn't come with its own screws or rear buttplate, so when swapping over you'll have to take the screws out of the hydrodipped ones (be careful not to scratch it now). 

NOTE: The original screw for the handguard went walk abouts so I just included the one screw I had spare which unfortunately has too big of a head on it. If I can find a suitable replacement I will swap it over but do bear in mind that the screw sticks out a bit at a funny angle. 
In the event I can't find a replacement screw, you'll want an M6 screw about 20-25mm.

The rear sight block has been replaced with a Replica Sig Romeo red dot which is *click* noic, but will need a replacement battery. 

I can also include the real leather sling that the previous owner included, though I forgot to take a picture.

Previous owner also upgraded the internals I will just copy paste from the original advert:

It’s a standard Cyma V6, plastic bushings replaced with Modify V6. I fit a set of 13:1 gears and shortstroked three teeth on sector and the SHS metal toothed piston. The piston has been changed to a POM vented bearing type from AK2M4. The Cyma nozzle has been changed to an O-ring type. Wiring loom replaced for standard Gate Mosfets and included is a Gate NanoHard. The bucking has been replaced with a G&G Green."

Hop has been set for 0.28g BB’s and it’s slinging them at around 290fps (+-350/0.2) the RPS is just over 20 with a 7.4 and just over 30 with an 11.1. There’s plenty of room in the stock for my largest nunchuck style lipo (11.1 2600)

The trigger response is super fast and the gun could make for a very unique CQB load out ."

Despite the latter statement I was using it for outdoor woodland skirmishes myself and had no problems whatsoever lasering people at range. 

I had the gearbox serviced when getting my FAL DMR'd recently, just for convenience sake and she still runs like a dream.

Included are three Cyma Hi-cap mags and a Cyma 450rd drum - the later of which can be quite cumbersome if you're a short arse with stubby arms like me, so if thats the case I recommend holding the side of the drum mag with your off hand to support the gun when laying down fire.

I really really like this gun and despite how awkward it is for me to use, part of me still really wants to keep it. 

The case will be included, however the standard faux-wood furniture will be boxed up and sent separately as there's no room for it. So if sending offers please bear in mind I will be having to send two parcels and factor that in.

Feel free to message me with any questions.