AK mags fitting and locking in place but not feeding

[Johndaniel4863]

Hi everyone, 

 

Hoping someone can help with an issue I am having.... 

 

Recently bought a cheap steel receiver and wooden furniture double bell Ak47 to add a dong handguard to (not that it will ever be used probably as I have far too many AKs already) 

 

The issue I have with it is I run Cyma midcaps that work with all my other different brands of AKs but in the double bell they fit and lock into place and when removed they spit out about 5 bbs (so I know they are feeding) but when I try and fire the rifle it just dry fires? 

 

Does anyone have any ideas what could be causing this as I am away at the moment and want to get it up and running on my return home!

 

Cheers 

 

John

 

[Lyndication]

Are you sure the Double Bell is compatible with those mags? 

 

Is there any difference between the DB AK mags and the Cyma ones? How deep they go into the magwell, the height of the feed tube, etc, etc

[Colin Allen]

I run CYMA midcaps in a Double Bell AK without any issues.

 

Did you buy it new or second hand?
 

 If the former, does it feed on the supplied mag?  If not, it could be a nozzle problem or there could be an issue with the hop unit.

 

If it was second hand, then can you borrow a different mag to try?

[Johndaniel4863]

They are identical from what I have compared, and when I remove them from the rifle they spit out about 4 or 5 bbs which makes me think they must be feeding 

Totally new and fires fine with the magazine it comes with

[Colin Allen]

5 minutes ago, Johndaniel4863 said:

They are identical from what I have compared, and when I remove them from the rifle they spit out about 4 or 5 bbs which makes me think they must be feeding 

Totally new and fires fine with the magazine it comes with

It could be that the initial insertion is pushing the CYMA mags up far enough for a few BBs to feed, after which the back of the mag drops a bit because the mag catch is not holding it up far enough.

 

You could try lightly shimming the underside of the lip at the back of a mag to see if it makes a difference.

[Austeyr]

1 hour ago, Colin Allen said:

I run CYMA midcaps in a Double Bell AK without any issues.

 

Second this, I've used Cyma, E&L, Specna and LCT mags in my DB Krink with no issues at all (Minus the E&L mags not feeding the last few bb's but they suck anyway so)

 

As Collin said, try shimming the lip of the mag, I had to do similar with Acturus AK12 mags fitting my LCT