cjcj94 Posted March 29 Share Posted March 29 Hey guys, I have a double eagle UTR45, its firing 4-5 shots on both single and auto with 2 beeps/vibrations following. Any ideas? the manual says '2 vibrations: system error/module stuck' I have stripped the gun down and nothing seems to be stuck. Ive tried resetting the Falcon control unit but still does the same thing. At a bit of a loss with it, i've tried reaching out to double eagle but they've been no help, they just asked me to contact the provider (patrol base) but with it being 2+ years old i don't see them being any help. Is the mosfet/falcon control unit dead? Link to comment Share on other sites More sharing options...
Colin Allen Posted March 29 Share Posted March 29 I don’t know the unit, but it sounds like it is time for a Perun. Link to comment Share on other sites More sharing options...
cjcj94 Posted March 29 Author Share Posted March 29 Perun? Link to comment Share on other sites More sharing options...
Colin Allen Posted March 29 Share Posted March 29 13 minutes ago, cjcj94 said: Perun? Perun Hybrid; an excellent control unit. Link to comment Share on other sites More sharing options...
Fatboy40 Posted March 29 Share Posted March 29 4 hours ago, Colin Allen said: I don’t know the unit, but it sounds like it is time for a Perun. I agree that it sounds like the Falcon is dead, however the GATE Titan II is an exact fit and 100% works with the stock trigger (the Falcon is basically a cheap GATE Titan II clone with a lot of the configuration abilities / features not present) cjcj94 1 Link to comment Share on other sites More sharing options...
cjcj94 Posted March 29 Author Share Posted March 29 9 hours ago, Fatboy40 said: I agree that it sounds like the Falcon is dead, however the GATE Titan II is an exact fit and 100% works with the stock trigger (the Falcon is basically a cheap GATE Titan II clone with a lot of the configuration abilities / features not present) Thanks bud, bought a GATE titan 2 today before i saw this anyways - is the Falcon easy to remove? Link to comment Share on other sites More sharing options...
Fatboy40 Posted Sunday at 13:15 Share Posted Sunday at 13:15 13 hours ago, cjcj94 said: ... is the Falcon easy to remove? It's easy peasy, it's only held in with one screw (sometimes there's a little hot glue holding its wiring in place inside the gearbox shell). Also you should only have to swap it in, the existing sticker on the selector plate should be fine. Also the Falcon has an always only light level of active braking, so you'll also need to enable this, but only a slight amount. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now