Safety pin for TAC 41 magazine

[ParHunter]

As probably anyone with a TAC 41 will have experienced the magazine of the TAC 41 likes to spill its content too easily, the slightest touch on the release tab and all the bbs are on the ground or in the pouch.

As the mag is behaving like a life granate I thought I treat it like one and add a safety pin 😉
So I quickly designed one and printed it. It prints in 2 min so you can print dozens of it and don’t worry if you lose them. With this pin in you don‘t have to worry that the mag will empty itself when you insert or remove it from your mag pouch.
You still have to be careful when inserting it into the rile though.

You can download the 3D model here:

TAC 41 Safety Pin on Cults3D

[Rogerborg]

Oh, great idea, thanks for that!