LazzurusMan Posted September 28, 2024 Posted September 28, 2024 So a friend recently got an upgraded srs, faceless barrel, r hopped, piston, fast hop etc etc. It seems to shoot straight, then as the bbs fly further they suddenly curve to the left with no wind. I'm guessing it's a hop issue, but we've had it apart and back together numerous times and everything is good and straight. Only thing I can think of is for some reason his hop isn't apply flat pressure, even though everything looks straight and flat when we look down the barrel with the hop applied.
ak2m4 Posted September 28, 2024 Posted September 28, 2024 Could be the Rhop setup, could also be a slight fault in the inner barrel. Personally I'd get rid of the rhop to start and test a few buckings out. Then move onto the inner barrel. Is the barrel stock? How long is it?
LazzurusMan Posted September 28, 2024 Author Posted September 28, 2024 43 minutes ago, ak2m4 said: Could be the Rhop setup, could also be a slight fault in the inner barrel. Personally I'd get rid of the rhop to start and test a few buckings out. Then move onto the inner barrel. Is the barrel stock? How long is it? 420mm Faceless barrel, Faceless rhop patch, unknown brand flat hop bucking, fow metal nub, fast hop chamber. Stupid thing is, it was apparently shooting perfect when he got it, he decided to take it apart to install a feed tube to stop the bbs from jamming the bolt, didn't fit it cause they sent the wrong part, put it back together and it's curved left ever since.
Pseudotectonic Posted September 28, 2024 Posted September 28, 2024 try turning the r hop patch 180 degree, if it hops to the right, it is the patch
LazzurusMan Posted September 28, 2024 Author Posted September 28, 2024 21 minutes ago, Pseudotectonic said: try turning the r hop patch 180 degree, if it hops to the right, it is the patch Won't work. The Faceless barrels have a weird shaped hop window, so I'm not sure I'll fit. Not a bad idea to try though.
ak2m4 Posted September 28, 2024 Posted September 28, 2024 (edited) What happens if he just puts the stock inner barrel back in? This the SRS barrel that has a 2-stage barrel right? If you mate wants he can send the barrel to me and I'll do a borescope inspection of it Edited September 28, 2024 by ak2m4
LazzurusMan Posted September 28, 2024 Author Posted September 28, 2024 55 minutes ago, ak2m4 said: What happens if he just puts the stock inner barrel back in? This the SRS barrel that has a 2-stage barrel right? If you mate wants he can send the barrel to me and I'll do a borescope inspection of it He doesn't have the original barrel, he bought it pre upgraded sexond hand. ak2m4 1
LazzurusMan Posted October 1, 2024 Author Posted October 1, 2024 Managed to sort it. He glued the rhop patch and it fixed the issue.
Recommended Posts