MadGoose Posted July 25 Share Posted July 25 Hi all I went into my CM.011 gearbox to do shimming for the first time, and broke the little tab on the switch trolley so had to buy a new switch (Rocket V3). The trigger now won't properly return on semi-auto - I have to manually push the trigger forward between shots. Full-auto is fine. It looks like the trolley may be catching the spring itself. How can I fix this please!? m2-res_1920p.mp4 Link to comment Share on other sites More sharing options...
Supporters Rogerborg Posted July 25 Supporters Share Posted July 25 The trolley is disengaging, which looks fine. It won't reset until the trigger returns, I think that's the problem you'll want to address. Sight unseen (or unfelt) I'm guessing that the trigger is rubbing slightly on the switch in a way that it wasn't doing before. V3 two part triggers can be a little fussy, I like to keep them well lubed, and airsoft parts often need a kiss with a file or some sandpaper. Worst case, you could try another trigger spring, or bend/unwind the end of the stock one to put more pressure on the trigger. It's also easy enough to wind a new trigger spring out of springier wire, if you have a bits box to dive into. Link to comment Share on other sites More sharing options...
Sewdhull Posted July 26 Share Posted July 26 Have you got the spring the right way up? The spring as I recall is off centre from its mounting points so has a right way to be fitted. Rogerborg 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now