Are M249 pistol grips universal?

[AttackBunny]

Hey guys and girls, 

 

I recently acquired a S&T M249 para, it had been converted to HPA but I’m looking to put a V2 gearbox back in. The pistol grip is missing the little screw in plate to hold the motor in place in the pistol grip, so I’ve been looking at a replacement but cannot work out if there are any differences between them or what’s best to do. The HPA engine I have, the gate pulsar S doesn’t have a nozzle long enough for me to use so I’m trying to avoid getting another engine for now… 

 

any help is much appreciated. 
 

Thank you! 

[Daveoc33]

The motor in the A&k and specna Arms m249 is not in the pistol grip. It's in the receiver. This is what the gearbox looks like. It's not a v2 gearbox. So a pistol grip from one of these won't work in a s&t m249. I hope this helps.. 

[JimFromHorsham]

8 hours ago, Daveoc33 said:

 

Best bet is probably to try and contact S&T directly

given its a v2 gearbox and standard long motor could a standard m4 pistol grip not be fitted in the short term ?

Edited July 4 by JimFromHorsham

[Daveoc33]

I think it's an old design. On action hobbies it says the s&t is based off the star m249 design. Star changed to ares a while ago.