How to disassemble double bell BYP-01B aks74u

[Svendogg]

Bought this as a bit of a two prong idea, firstly to have a go with an AK platform gun, and secondly as a learning tool. At the £69.99 i paid for it, I'm not too bothered if I make a mess of it. 

Trouble is, I am not sure how to go about getting the gun apart. Seems I can't remove the hop up and barrel without splitting the gun (like the TMs do I believe) but even with the screws underneath removed it doesn't seem to want to come apart. 

 

Anyone got advice on this please?

[gavinkempsell]

does this help...

 

 

 

[Majestyk]

 

[Svendogg]

Ok forget about this thread and came across it searching for other Ak based info.... Thought I'd update to help people out. 

 

Seems with this gun you take out the 4 screws in and around the magwell, then you kinda expect the front and rear to split apart, as I believe TM types do. Nay Nay my friends, not yet. 

 

If you look at the front sight front the barrel end, you will notice a round pressed in plastic cap, you will need a small screwdriver to pry this off. This will reveal a large Allen bolt head, which runs through the top handguard into a metal lug on the other end, which holds the 2 pieces together. Remove this and the sections will separate apart. 

 

Hope that helps someone else and saves them scratching their head for longer than they really need to 😂