Jump to content

how to adjust a&k svd cheekpiece


lil airsofter
This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

i have been wondering how to adjust it properly, i know it has to all clip in but i dont know how to get it to do so.

 

and also the hop up if its no trouble.

Link to comment
Share on other sites

  • Supporters

simple really:

on one side there is a wire clip thing, undo that and unhook the now loose thing wire from the wire hook on the other side. (that made no sense)

take it off

place it on top where you want it to live

take the dangly down wire and loop it underneath the stock, hook it onto the hook and pull the retainer/tightener (more wire) down to tighten it on.

 

the hop up is fidly:

At the rear of the reciever on the left hand side (the one with the bolt) there is a clip-thing

spin it so it points slightly backwards and mostly down

pull the upper reciever off, if it doesnt go easily, spin the thing back and forwards untill it does pull up

cock the rifle

holding the bolt back there is a small grub screw on the top of a blue hop up chamber

I think it is a 1mm/1.5mm allen wrench that fits it, screw it in for more hop and out for less

let go of the bolt

put the upper back on and spin the thing back to locked position

fire

 

it IS safe to fire it with the upper removed

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...