Cyber gun 1911 c02 mags - need new o rings

[Emergencychimps]

Hopefully someone can advise. 

 

I have a couple of 1911 co2 mags for the cyber gun 1911, it was advertised as the "Rail gun" but is basically a clone of the KWC 1911 and I believe the RWA Nighthawk as well. Surprise surprise, they leak and I'd like to fix them. 

 

Are there any good guides or info on what size o rings I need to get, where to get them from etc? I have tried google and either im rubbish (likely) or the info is pretty buried.

Edited October 28, 2022 by Emergencychimps

[JimFromHorsham]

Where are they leaking ? Within the mag at the bulb seal or straight through the top ?

 

full service kit here :

 

https://www.pullthetrigger.co.uk/epages/es774039.mobile/en_GB/?ObjectPath=/Shops/es774039/Products/5214&Locale=en_GB

 

bulb seal here ;

 

https://ebog-designs.co.uk/products/ebog-deisgns-cybergun-kwc-1911-co2-co2-bulb-piercing-valve-replacement-seal

 

Other parts listed here but mostly out of stock , but at least it gives you some search  terms .

 

https://ebog-designs.co.uk/search?q=Kwc

[Emergencychimps]

Leaking through the top, I have never been to either of those sites but I think you're spot on that they'll be helpful! 

 

Thank you! 

[Colin Allen]

The O ring for the valve is 8mmOD, 6mmID.