WinterSniper Posted November 23, 2021 Posted November 23, 2021 Ouch. 200fps? You look like you have an air leak over there mate. A .2g with the high power sniper would pump out about 580fps. I have a stock MB02 which pumps out about 450 with 0.2s. check your ring as well-might be getting old or snagged on something. Try greasing it (not too much though. Listen to the sounds when you fire-any sharp noises which shouldn’t be there should be located
AirSniper Posted November 23, 2021 Posted November 23, 2021 1 hour ago, WinterSniper said: Ouch. 200fps? You look like you have an air leak over there mate. A .2g with the high power sniper would pump out about 580fps. I have a stock MB02 which pumps out about 450 with 0.2s. check your ring as well-might be getting old or snagged on something. Try greasing it (not too much though. Listen to the sounds when you fire-any sharp noises which shouldn’t be there should be located Looking at the spec, its quoted as 440fps to 450fps with 0.2g bb's which means... its a 1.9 Joule rifle. Which means for a 0.4g bb, the most you are going to get is 311fps however, if you put in a more powerful spring, you up that energy to 2.5 joules, the maximum fps you are going to achieve is 519fps on 0.2g bb's It is not the FPS but the amount of JOULES as the law only recognises joules. (4)The permitted kinetic energy level is— (a)in the case of a weapon which is capable of discharging two or more missiles successively without repeated pressure on the trigger, 1.3 joules; (b)in any other case, 2.5 joules.” https://www.legislation.gov.uk/ukpga/2017/3/section/125?view=plain 57A (4)(b) So keep that in mind.
Recommended Posts