Jump to content
Classifieds rule 5 - adverts must have the username and date in photos. Adverts failing rule 5 will be deleted

Help please! The popular MK23 valve.

Liamcella96

By Liamcella96
in General Discussion

This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

Liamcella96 Apprentice

Liamcella96

Posted
Posted

Hi guys.

 

I have an mk23 pistol and as you'd expect my TM mags started leaking... what a surprise. Im 99% sure it was due to old dried out O rings but whilst I was having to open it anyway I thought I may as well do the full monty.

 

So I have filled the release valve with resin as is recommended. 1 thing I didn't do though as I had read it was OK was I didnt remove the valve from the hole before filling it on top of the valve.

 

Does this make any difference? Or am I going to have to drill it all out and refill it? I'm pretty sure it shouldn't matter as it is still completely filled but can somebody confirm please.

 

Thanks

heroshark Veteran

heroshark

Posted
Posted

Suck it and see, should be.

Liamcella96 Apprentice

Liamcella96

Posted
  • Author
Posted
7 hours ago, heroshark said:

Suck it and see, should be.

 

Yeah it's a complete air seal. But does it matter that the valve is in there still

heroshark Veteran

heroshark

Posted
Posted

Should be I leave them in but I don't use epoxy.

Archived

This topic is now archived and is closed to further replies.

Go to topic listing
×
×
  • Create New...