LazzurusMan Posted July 5, 2021 Share Posted July 5, 2021 So, this is the issue I'm having with my we xdm pistol. If anyone knows how to fix this I'd be highly grateful if you could link/tell me. VID_20210705_200748.mp4 Link to comment Share on other sites More sharing options...
Supporters Adolf Hamster Posted July 5, 2021 Supporters Share Posted July 5, 2021 sounds like there's barely any gas in the mag. make sure you're inverting the mags when filling and hold down for a while to be sure a good amount of liquid in the mags. Link to comment Share on other sites More sharing options...
LazzurusMan Posted July 5, 2021 Author Share Posted July 5, 2021 22 minutes ago, Adolf Hamster said: sounds like there's barely any gas in the mag. make sure you're inverting the mags when filling and hold down for a while to be sure a good amount of liquid in the mags. There was plenty of gas, turned out the fake firing pin and mechanism at the back of the slide was preventing the slide from moving back after gun was fired, so the gas would just slowly vent. I took that piece out and she fires fine. Link to comment Share on other sites More sharing options...
Supporters Adolf Hamster Posted July 5, 2021 Supporters Share Posted July 5, 2021 Fair enough, if we were sure the mags were full that woulda been the next port of call but looks like you jumped ahead on that. Link to comment Share on other sites More sharing options...
LazzurusMan Posted July 5, 2021 Author Share Posted July 5, 2021 14 minutes ago, Adolf Hamster said: Fair enough, if we were sure the mags were full that woulda been the next port of call but looks like you jumped ahead on that. Yeah, I went to take the slide off and have a look, and suddenly I couldn't rack it back at all. Only took a quick look to see what the issue was at that point. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.