ChrisG Posted October 23, 2019 Share Posted October 23, 2019 Sorry if wrong forum.  How do I go about fitting a supressor onto the end? Hopefully someone has one.  I have the right threaded attachment, but theres no thread on the gun? Unless I yank the top off of the end (somehow) and the thread is below 🙄🙄 Link to comment Share on other sites More sharing options...
Guest DrAlexanderTobacco Posted October 23, 2019 Share Posted October 23, 2019 Some barrels will have a thread for attachments on the outside, sometimes it's on the inside of the barrel. Put your finger into the barrel muzzle to have a feel for internal threads. Â In future there's a "quick questions and answers" thread which might be better suited for this, it's stickied. Â Good luck! Â P.S. If the barrel doesn't have any threads I think you could probably get it threaded, you'd need to know the thread dimensions and find someone with a suitable die to cut it. Link to comment Share on other sites More sharing options...
Monkeywrencher Posted October 24, 2019 Share Posted October 24, 2019 should be a cap screwed into the muzzle end of the barrel, to be replaced by ...https://www.patrolbase.co.uk/cyma-cm-701-702-silencer-adaptor-14mm-ccw Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.