Blueforce Posted August 28, 2019 Share Posted August 28, 2019 Hey there, I just bought this gun and I'm having a few issues and I'd like to know your ideas on it.... slide works even on safe. safety gets locked between safe and fire (full auto position) and works (semi). slide gets stuck (probably on hammer) but also the nozzle stays fixed on the barrel until I pull further/harder. Is this common for WE? VID_20190827_164748.mp4 Link to comment Share on other sites More sharing options...
EDcase Posted August 28, 2019 Share Posted August 28, 2019 Its working fine. The 'safety' lever is a decocker so do not try force it on. - Leave it up in the fire mode. - Rack the slide (to load a round) - Push the lever down to decock it. Its now in safe - Lift it up when you are ready to fire. The idea behind this is to be ready to fire without having to rack. Of course its double action so not completely necessary. When a magazine is loaded with gas DO NOT try to decock by holding the hammer as you pull the trigger!!! This could fire a round as the internal hammer still hits the gas valve. You can safely decock by holding the hammer and pull the trigger if you first remove the mag. Link to comment Share on other sites More sharing options...
Blueforce Posted August 28, 2019 Author Share Posted August 28, 2019 It does not decock (maybe should but doesn't). it has a very safe manual decock, don't worry. the slide should be immovable while safety is on (on the real gun at least) Link to comment Share on other sites More sharing options...
EDcase Posted August 28, 2019 Share Posted August 28, 2019 Must be a different model to mine tho still WE. Mine does not hold the slide when safe either. I was told not to rack the slide when the lever is down in safe. Link to comment Share on other sites More sharing options...
Blueforce Posted August 28, 2019 Author Share Posted August 28, 2019 thank you for your input ^-^ Link to comment Share on other sites More sharing options...
EDcase Posted August 29, 2019 Share Posted August 29, 2019 You're welcome, good luck with it. Link to comment Share on other sites More sharing options...
Keithlag Posted August 29, 2019 Share Posted August 29, 2019 there is nothing wrong with it my Tm one and my KJ works m9 are the same also my grandsons src m92 all do the same the nozzle will stop sticking after you have used it also use silicone oil as i have found that they tend to like lots of lubrication. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.