alex4 Posted May 8, 2011 Share Posted May 8, 2011 Hi everybody I have had Airsoft on my list of things to do for some time, and have decided to set up a work event to experience this. Apart from one or two people, we're all new to this (about 20 of us), and I have a couple of questions. We're all based in London, and are planning to hit Bunker 51 in Greenwich. I have my eye on a Tokyo Marui G36C, as it looks like it has good upgrade potential, and can be used for both mid-range and QC combat. What do you all think of this selection for QC combat? In terms of clothing, I've seen a lot of semi-pro looking dudes in full army gear on youtube. I'm planning to aim for boots, combat trousers and a hooded top. Is this foolish? If anyone can give me some advice on these points I'd be really grateful... Cheers Alex4 Link to comment Share on other sites More sharing options...
Supporters M_P Posted May 8, 2011 Supporters Share Posted May 8, 2011 What you have said is fine, the tm g36 is good, and yes has good potential for upgrades, As for what you wear boots trousers and a hoodie or fleece in black/ navy Will.be fine Good luck Link to comment Share on other sites More sharing options...
alex4 Posted May 8, 2011 Author Share Posted May 8, 2011 What you have said is fine, the tm g36 is good, and yes has good potential for upgrades, As for what you wear boots trousers and a hoodie or fleece in black/ navy Will.be fine Good luck Thanks man It seems that TM have a good reputation. Are there any other cheaper manufacturers that do G36C's? Or am I better off sticking with TM? Link to comment Share on other sites More sharing options...
Supporters M_P Posted May 8, 2011 Supporters Share Posted May 8, 2011 If it were me I would get an SRC g36, theyre cheaper and have better externals, the internals are slightly worse than the tm, but the money saved is worth it. Plus you can always upgrade thee hopup later which is the slightly worse part. I think that SRC are the best starter guns Link to comment Share on other sites More sharing options...
alex4 Posted May 8, 2011 Author Share Posted May 8, 2011 If it were me I would get an SRC g36, theyre cheaper and have better externals, the internals are slightly worse than the tm, but the money saved is worth it. Plus you can always upgrade thee hopup later which is the slightly worse part. I think that SRC are the best starter guns nice one mate - sorry, one more question... I'm obviously not registered, and I really don't want to get my gun two-toned. Am I right in assuming that they (as in the distributer) can't send me the rifle unless I'm on the register (UKARA or something...)? Wolf Armouries have a hire-purchase scheme whereby you buy the rifle from them, but they hold it for you until you've 'earned your stripes' as it were. Would you recommend this (hire-purchase) approach, or is there a way to get hold of a non-two-toned SRC rifle? cheers Link to comment Share on other sites More sharing options...
Supporters M_P Posted May 8, 2011 Supporters Share Posted May 8, 2011 I would definatley do the wolf armouries hired - purchase scheme, makes the whole thing a lot easier Link to comment Share on other sites More sharing options...
alex4 Posted May 8, 2011 Author Share Posted May 8, 2011 I would definatley do the wolf armouries hired - purchase scheme, makes the whole thing a lot easier Thanks mate OK, definately the last question (for today). Are there any good sites (or threads) that give good advice for CQB? I've had a quick look on YT, and found a couple of useful bits about cornering, but that's about it. Link to comment Share on other sites More sharing options...
Supporters M_P Posted May 8, 2011 Supporters Share Posted May 8, 2011 Well the best thing to do first is try it, to see how you think u could improve But just read up on cornering andv you should be ok. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.