Jump to content

Beretta M9 (WE, T.M ETC) gas magazine leaking fix


Readman97
This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

Hey guys, I've noticed over the past few months a slight leak developed from my WE M92 (green gas) magazines which recently got so bad i lost a full mag of gas from the slow leak over the course of the game, after trawling YouTube i found this guy's video (link below) - tried what he suggested and it fixed the problem first time round, if anyone else us encountering a similar issue, try removing and oiling the filling valve o ring (flathead screwdriver to remove the valve) - if that doesn't work, follow what this guy does, worked for me first time and has been fine since.

 

 

Link to comment
Share on other sites

Temporary fix, it'll leak again not long after...

 

Best fix is to just buy a new fill valve or base O-ring.

 

Fill valves are like £5 and O-rings are like under £10 for two.

 

Parts can me found here: www.kyairsoft.com

Link to comment
Share on other sites

1 minute ago, Chris_B said:

Temporary fix, it'll leak again not long after...

 

Best fix is to just buy a new fill valve or base O-ring.

 

Fill valves are like £5 and O-rings are like under £10 for two.

 

Parts can me found here: www.kyairsoft.com

So far its held like a champ, if it does it again ill look at new o rings but so far its holding up great.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...