AirsoftAugM4 Posted July 20, 2017 Share Posted July 20, 2017 Hi I want to be able to put a longer barrel and suppresor on my cm16 srs for outdoors to increase range but be able to easily remove it for cqb. Can anyone recommend a good setup? Im UK based if that helps. Any help would be really apreciated. Also im kinda new ish to airsoft so sorry if im being a bit of a noob. Link to comment Share on other sites More sharing options...
warlord Posted July 20, 2017 Share Posted July 20, 2017 You're not really going to increase range by doing that. Adding an longer outer barrel would be for appearance only. The fps is reliant upon inner barrel length and the air volume displaced by the piston. So a change in inner barrel length should be matched by a change in cylinder displacement - if I have read things correctly. Playing with a short gun indoors or outdoors should be just fine. Try it out unchanged and if you feel would want some length try out a long suppressor. Link to comment Share on other sites More sharing options...
Hangtight Posted July 20, 2017 Share Posted July 20, 2017 Barrel length makes no difference to range or accuracy once you're over about 200mm. As warlord pointed out barrel length needs to be matched with cylinder volume. Simply sticking a longer barrel on will probably reduce fps and accuracy. Cheapest, easiest and the most effective way to increase range and accuracy is to use good quality, heavier BBs, at least 0.25g, 0.28g for preference. As long as the hop rubber in your CM is in good condition it should manage 0.28g OK Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.