Oli.Hanks Posted April 1, 2017 Share Posted April 1, 2017 So i have been taking down this m4 for the last hour... so many stried screws anyway its a classic army body and some how the gesr box fits so snug into it i cant get it out ill send some pics Link to comment Share on other sites More sharing options...
Oli.Hanks Posted April 1, 2017 Author Share Posted April 1, 2017 Thats as far forward as it will go Link to comment Share on other sites More sharing options...
Supporters Sitting Duck Posted April 1, 2017 Supporters Share Posted April 1, 2017 try pulling the box at the back as per usual BUT pull the trigger at same time - it should allow the box a smidge more wiggle room forward then eventually pop up at the spring guide area it has to go unless somebody cast the damn receiver around the box nah pull trigger and it should give that fraction more wiggle perhaps when refitting a tiny file by top of receiver/spring area to get her back in looks like one of them QD spring boxes from say TomTac or HelmetWorld (snigger) did it have a micro switch trigger ??? reckon best bet is pull trigger, keep front of box down and with a large screwdriver lever at the rear just under spring guide area, sort of forward & upwards slightly Link to comment Share on other sites More sharing options...
Oli.Hanks Posted April 2, 2017 Author Share Posted April 2, 2017 Thanks that was amazingly helpful all sorted now cheers Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.