Jump to content

VFC PEQ Box Problem


Katana
This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

It keeps flickering constantly brighter and dimmer and on and off when activated. Moving the selector around and even pushing down on it seems to affect the flicker but no matter if it is the laser or light, it keeps doing it and it is very annoying. Anyone know any fixes? 

Link to comment
Share on other sites

Strip it and see if you can get into the contacts and selector. If you can spray some electronic contact cleaner in. It might fix it and it's probably a better bet than taking it to bits to resolder.

If it doesn't fix it then you know you have either bad solder or a poor selector.

With the contact cleaner do a test area first to make sure it's not going to melt the plastic.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...