lemon191 Posted February 28, 2017 Share Posted February 28, 2017 Hi guys. Gonna order some lipo batteries now my imax has arrived so I'm looking at component shop and they have the vapex 7.4 1450 mah 25 c crane stock ones, is the 25c sufficient for my stock WE m16? I would guess it is since everything is stock internally but thought I'd ask just incase cheers Link to comment Share on other sites More sharing options...
Supporters Sitting Duck Posted February 28, 2017 Supporters Share Posted February 28, 2017 just check dimensions - very closely no point buying a battery that don't quite fit 7.4v 25c is a good spec not all crane stock tubes will take 22mm width G&G's are like 18mm to 19mm hence measure stuff carefully you can also try hobbyking: https://hobbyking.com/en_us/airsoft/batteries.html this might be worth a look: https://hobbyking.com/en_us/turnigy-nano-tech-1200mah-2s-25-50c-lipo-airsoft-pack-1.html BUT make sure you buy from UK or at a push Europe otherwise you can easily buy from say HongKong and end up waiting 3 or 4 weeks with a slight risk of import duty (rare with small orders but can sometimes get stopped on med/larger shipments) Link to comment Share on other sites More sharing options...
lemon191 Posted February 28, 2017 Author Share Posted February 28, 2017 Cheers , turnigy a good brand ? I've got a solI'd stock m16 and ak47 so if they don't fit my m4s then I can use them for the others and get some smaller ones Link to comment Share on other sites More sharing options...
Supporters Sitting Duck Posted February 28, 2017 Supporters Share Posted February 28, 2017 Turnigy are good brands - I have a stubby fixed stock on my m4's so if you got an AK with battery in fixed stock or others then you can use the bigger/better value block batteries... I got some of these 25c in 7.4v & 11.1v.... https://hobbyking.com/en_us/zippy-compact-2200mah-2s-25c-lipo-pack.html comes with xt60 on there but I cut the ends off & fit deans anyway though did buy some xt60 to small tamiya adapters for a while but now just gone deans on most guns any battery for "airsoft" either tiny bespoke size/shape or the crane stock or nunchuck type will be a bit more if you buy from airsoft stores you will always pay through the nose - in nigh on most cases look around and RC shops normally offer great value - doubt if you get cheaper than HobbyKing Worth a look or club together with a m8 to split shipping.... some of the more bespoke crane lipo's you need to buy from componentshop others - buy a few from hobbyking - just make sure you check UK not China etc... Link to comment Share on other sites More sharing options...
Hangtight Posted February 28, 2017 Share Posted February 28, 2017 If you've got a Crane stock that'll take the 1450mah buffer tube batteries it's worth making up a little harness so you can connect two in parallel. One in each tube and you've got 2900mah of capacity and a large current overhead. Means your batteries never get stressed and will last all day. Link to comment Share on other sites More sharing options...
lemon191 Posted February 28, 2017 Author Share Posted February 28, 2017 4 hours ago, Sitting Duck said: Cut Will have a look on hobby king , I did look at the block type as they were bigger but thought I'd get some all round one's but I'll compare the size to the 8.4v one that's in the crane stock now and see if not I'll see what else is about Cheers Link to comment Share on other sites More sharing options...
.gif.c9becc9e80e8b91706ea684ec6e23c92.gif)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.