ikarma70 Posted February 19, 2017 Share Posted February 19, 2017 Hi guys, just bought an asg mp9a3 and converted it to hpa( little bloody beasty of a gun), however I'm having issues with the 2 mags not feeding. any ideas please? many thanks andy Link to comment Share on other sites More sharing options...
alex90 Posted February 20, 2017 Share Posted February 20, 2017 it could be a few things that cause this the loading nozzle needs a tiny bit of lube or the nozzle springs have jammed up and lost there springyness lubeing the nozzle pretty easy thing to do but nozzle spring bit of a pain to do involves lots of punching out of pins but the new set of springs are cheap to replace or could be the mags have got a be sticky or there's a bit of oil stopping bb coming out the feeds lips have you got other mags that feed fine and iv just in the process of hpa change few mags to tap what psi do you run and what fps does it give alex Link to comment Share on other sites More sharing options...
ikarma70 Posted February 20, 2017 Author Share Posted February 20, 2017 Running at 280fps and can't recall the psi. guns new as are the mags, I did run a q tip in the channel and it came out filthy so I might give it a good polish to smooth it out. keep you informed as to how it goes. Link to comment Share on other sites More sharing options...
alex90 Posted February 20, 2017 Share Posted February 20, 2017 might be worth dropping a small blob of silicone oil done the port wear gas flows in to the nozzle and use ur finger to gently pull the nozzle back and forth and the few shots to clear it out sometimes the piston head in the nozzle gets dry and Couse's friction on the nozzle and not extending out far enough to load each bb Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.