ikarma70 Posted July 31, 2016 Share Posted July 31, 2016 Hi guys, how do you remove the handguard on a cm rk47 please? I tried the usual lever but it doesnt release the gas tube. Many thanks Andy Link to comment Share on other sites More sharing options...
dazzer306 Posted August 2, 2016 Share Posted August 2, 2016 I've got the blow back version, not sure if same set up on front, on side of cocking handle, by the front sight is a lever, move this clock wise, this should release the upper part of hand gaurd, when this is removed you will see by gas block in side of bottom part of handguard a small lever push this up you may have to use a flat head screw driver then the bottom part is now free First pics are of lever and which way to move it, second pic is of the other lever inside lower part of lever finger pointing at it Link to comment Share on other sites More sharing options...
ikarma70 Posted August 5, 2016 Author Share Posted August 5, 2016 I have tried that and it loosens the gas tube up but doesnt fully release it....maybe im just nervous of damaging a new gun? Thankyou so much for replying!!!!! Link to comment Share on other sites More sharing options...
dazzer306 Posted August 6, 2016 Share Posted August 6, 2016 You will need to use a little force, try a little side to side, up and down motion on the upper part while pulling towards stock, it will come off had same thing with mine and as you see I've changed the hand gaurd Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.