Jump to content

g&g cm16 srxl


smellaard
This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

I bought a g&g cm16 srxl played with it for two times.

first time it was ok to use at the site site limit is 350fps

second time different site but same organisation and same site limit 350 fps

but my gun was today at 417fps

so now i'm not sure what to believe or do!!!

did they let me play first time even I had high fps or has my gun upgraded it self :)

 

do I need to change the spring? is this something you can do yourself?

also not sure what standard spring size is in the gun

 

telford area

 

 

 

Link to comment
Share on other sites

  • Supporters

their chrono is f*cked or you using 0.12's in my book

 

sites will ask you weight of bb - often 0.20's are used

sites like Mall chrono the gun on THEIR mags or on pistols they fire a few shots out then refill the mag with THEIR 0.20's

This ensures all guns are checked as thoroughly as possible to ensure they are with site limits

 

No a gun will not increase fps - normally this will decrease over time as spring fades & seals wear

There could have been a mediocre seal with nozzle to hop that may increase decrease with say different mags or iffy seal that may have improved - or hop fully wound on/off may alter the fps

 

But 67fps variation and UPWARDS ????

 

look at you gun's box - if you got an import say destined for USA - it would normally have a yellow "high velocity" sticker on it - 390/400fps

But most normal G&G's shoot at 330-ish - some a little over but not THAT much

 

you sure you haven't dropped in 0.12gm bb's - coz that would probably be about right to me

Link to comment
Share on other sites

their chrono is f*cked or you using 0.12's in my book

 

sites will ask you weight of bb - often 0.20's are used

sites like Mall chrono the gun on THEIR mags or on pistols they fire a few shots out then refill the mag with THEIR 0.20's

This ensures all guns are checked as thoroughly as possible to ensure they are with site limits

 

No a gun will not increase fps - normally this will decrease over time as spring fades & seals wear

There could have been a mediocre seal with nozzle to hop that may increase decrease with say different mags or iffy seal that may have improved - or hop fully wound on/off may alter the fps

 

But 67fps variation and UPWARDS ????

 

look at you gun's box - if you got an import say destined for USA - it would normally have a yellow "high velocity" sticker on it - 390/400fps

But most normal G&G's shoot at 330-ish - some a little over but not THAT much

 

you sure you haven't dropped in 0.12gm bb's - coz that would probably be about right to me

 

http://www.airsoftmaster.com/fps-chart-for-airsoft-guns/

 

Could have been overweight BBs at the first test too. Seems unlikely for a cm16 though. :)

Link to comment
Share on other sites

I have been using same BB's as the first time 0.20gr.

 

And thanks for the information

 

I have too downgrade the spring to make sure I can play every time

 

 

 

You should try and get a second opinion first, no good opening the thing up if it's not necessary.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...