JerseyRider Posted August 6, 2010 Share Posted August 6, 2010 Hi all, I was wondering if anyone had some Hint & Tips for breaking in your new stuff may it be Gear,Parts or Guns to help get the best out of them My Tip comes from my RC car days When you have a new motor, or you buy a new gun, before you even put it into the gun strap it down to a surface so the motor can freely spin Then connect it to a low voltage source like a PP3 (the rectangle one with the two connections at the top) and leave it to spin Basicly what happens is the bushings etc inside get a chance to wear down so it runs smoothly The result? A slight RPM incresse and the motor will last longer as well Has anyone else got anything similer? Thanks Jack Link to comment Share on other sites More sharing options...
Supporters Matt! Posted August 6, 2010 Supporters Share Posted August 6, 2010 well, always release the springs from the mags after a game and after a game just fire a few shots in semi to release the spring aswell this way you wont lose a lot of FPS with the spring being seized for a while. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.