Jump to content

KAC PDW upgrade suggestions?


lord_of_amusement
This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

Well, if you want more power, an M110 spring; that knocks the FPS around 330 - 350, but upgrading power doesn't always do the job, It puts more strain on the gearbox itself, the trusty M100 spring always works perfectly.

 

Also, lowering fps to around 280-300 will only increase the ROF since it takes less effort for the motor to turn the gears.

 

If you want a higher fire rate, first of all, change the battery to a 9.6v if you haven't done so. Then you should grease your gears and bushings a bit more to decrease friction. The fastest fire rate I would recommend would be be around 900-1000 rpm. Anything faster, you will run a risk of wearing down the gearbox or motor faster than you'd expect.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...