kev.k Posted March 13, 2013 Posted March 13, 2013 I bought a cheap eotech 557 clone today. I'm pleasantly surprised overall, but its not the tightest fit. I was gonna pad it out with some insulation tape. Anyone got a less "crude" suggestion? Cheers
Tariq Posted March 13, 2013 Posted March 13, 2013 As in it wobbles where it attaches to the rail? What method does it attach? QD or screw on? etc
kev.k Posted March 13, 2013 Author Posted March 13, 2013 Yes, it wobbles slightly. It's screw on. I could have got QD but I thought that would be the more likely to wobble with it being a Chinese knock off.
Tariq Posted March 13, 2013 Posted March 13, 2013 You can usually tighten the QD ones so they fit snugly. Screw on in theory i though is just screw on until tight.
kev.k Posted March 13, 2013 Author Posted March 13, 2013 I can't tighten it anymore. It works surprisingly well, but the build quality is what you'd expect. It wobbles a bit.
Supporters TPI Posted March 13, 2013 Supporters Posted March 13, 2013 Which way up and down the rail or side to side?
kev.k Posted March 13, 2013 Author Posted March 13, 2013 A bit of both. It won't tighten anymore. The base isn't perfectly level. Think I'll have to pack it out with something, can't see any other option.
kev.k Posted March 13, 2013 Author Posted March 13, 2013 able to take a pic of it?. I'll give it a go.
kev.k Posted March 13, 2013 Author Posted March 13, 2013 I don't know if these are any good? The screw on clasp doesn't tighten against the rail properly when fully tightened if that makes sense? Sorry bout the huge pics. Used my ipad.
lethaldave Posted March 14, 2013 Posted March 14, 2013 have you tried a washer/spacer behind the nut?
kev.k Posted March 14, 2013 Author Posted March 14, 2013 I've solved it by sticking some black draught excluder tape to the bottom of the sight, in the channel that sits on top of the rail.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.