CA G36 Gears Upgrade

[Denneyboy32]

Hello all

 

I'm looking to upgrade my stock G36 to run 11.1 LiPo battery's with out it breaking every time I pull the trigger .

 

Thanks Dan

[joshcowin]

okay mate im assuming you want a high rof and a quick trigger pull semi right?

[Denneyboy32]

okay mate im assuming you want a high rof and a quick trigger pull semi right?

 

 

 

 

Yea pretty much

[joshcowin]

i would reccomend a modify quantum gear set,bushing bearings,a good quality piston and then follow a guide to short stroke it,a m90 spring or around 300 fps so that the gears arent struggling too hard,a tm Eg30000hc motor,ball bearing spring guide,good quality tappet plate,thats about it,you will be looking at around 45-48 bbs per second

[Denneyboy32]

i would reccomend a modify quantum gear set,bushing bearings,a good quality piston and then follow a guide to short stroke it,a m90 spring or around 300 fps so that the gears arent struggling too hard,a tm Eg30000hc motor,ball bearing spring guide,good quality tappet plate,thats about it,you will be looking at around 45-48 bbs per second

 

 

 

Thanks very much I will start shopping