craig Posted May 27, 2012 Share Posted May 27, 2012 just got some 40mm grenade and some of them are making a farting noise when i put the gas in also in one of the there are these wee sliver balls that fell out and ideas Link to comment Share on other sites More sharing options...
Supporters Rock-climby-Dave Posted May 27, 2012 Supporters Share Posted May 27, 2012 you need to 'reset' the grenades: Push the firing button all the way in, once properly reset, releasing the button will leave it lying flush with the back of the grenade. The balls are part of the mechanism inside, unscrew it and there will be a metal thing with a spring on one end. The balls sit on 4 holes around the sides of the metal thing. Link to comment Share on other sites More sharing options...
craig Posted May 30, 2012 Author Share Posted May 30, 2012 nope still leaking like mad so far ive used a can of gas trying to fix it and about the balls if there not in place what happens Link to comment Share on other sites More sharing options...
ROBORAPTOR Posted October 15, 2012 Share Posted October 15, 2012 Hi you need to push the firing mechanism in, you should hear a slight click as the seal resits. As for the ballbearing use vasaline to reseat the bearing into teh hole. NEVER use MD40 I did and all teh ball bearings fell out Link to comment Share on other sites More sharing options...
Alexb111 Posted October 15, 2012 Share Posted October 15, 2012 If you stand the advertising it pretty comprehensive and could just help you watch past 3/4 minutes... 6:40 is probably a good time to start actually... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.