rjmcgough Posted May 6, 2012 Posted May 6, 2012 My ICS M4A1 (split gearbox) stopped firing. When I inspected it I noticed the switch (part that is pushed forward by trigger to allow current through) is not making contact with the other side and therefore no current is geting through to the motor. If you pull the trigger and push the switch forward it will m ake contact and fire Anyone know how to fix this
Supporters Finius Posted May 6, 2012 Supporters Posted May 6, 2012 Is it going far enough forward to make contact and just the contact are too wide to touch, or is it stopping before it touches them?
rjmcgough Posted May 6, 2012 Author Posted May 6, 2012 Is it going far enough forward to make contact and just the contact are too wide to touch, or is it stopping before it touches them? It's not going far enough forward and stopping before it touches them
GunTech Posted September 9, 2012 Posted September 9, 2012 It's not going far enough forward and stopping before it touches them Carefully bend the contacts in (equally) untill you are happy with the trigger pull length.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.